Product Description
IC485AI, the Isolated Converter, is a bi-directional converter that transparently converts RS-232 signals to RS-422/RS-485 signals (and vice versa), thus permitting the creation of reliable long distance communication systems using standard computer hardware.IC485AI provides point-to-point, multidrop, and simplex operations over 4000 feet. Designed with built-in optocouplers for exceptional signal isolation, plus transformers for excellent power isolation, this extremely reliable isolated converter enhances the quality of the data communication. At the same time, it protects your equipment from electrical surges of up to 2000 Volts.Customer Reviews:
Ideal features for RS232 to RS485 conversion.......2007-02-25
Average customer rating: |
Rs-232 To Rs-4485/ Rs-422 Bidirectional Converters
Manufacturer: ATEN TECHNOLOGIES ProductGroup: CE Binding: Electronics Product Features:
ASIN: B000067RAY ![]() |
Product Description
The IC-485S is a hardware solution to the problem of converting signals between two standards. Data transfer can take place at up to 1200m (4000'), over four- or two-wire cable for full or half duplex, respectively. The converters can handle any RS-485/RS-422 device allowing it to function as a short haul modem or interface converter. Request to send (RTS) selection allows up to 32 receivers to be set up in a multidrop installation, making for a cost effective network configuration.The IC-485S is a bi-directional interface converter for RS-232 and RS-485. With the IC-485 series, it provides Point-to-Point, Multidrop and Simplex operations. The IC-485S also provides an extra Monitoring function. Two slide switches are used to configure its operation mode, contention control, and assignment of the RS-232.
Average customer rating: |
Aten Technologies Rs232 To Rs422(485)Bi-Direction Converter Non-Power
Manufacturer: ATEN TECHNOLOGIES ProductGroup: CE Binding: Electronics Product Features:
ASIN: B00005111D ![]() |
Product Description
The IC-485S and IC-485SN represent hardware solutions to the problem of converting signals between two standards. Data transfer can take place at up to 1200m (4000'), over four or two wire cable for full or half duplex, respectively. The converters can handle any RS-485/RS-422 device allowing it to function as a short haul modem or interface converter. Request to send (RTS) selection allows up to 32 receivers to be set up in a multidrop installation, making for a cost effective network configuration.
Average customer rating: |
ATEN CORP RS232 TO RS422/RS485 CONVER (ATENIC485S)
Manufacturer: ATEN CORP ProductGroup: CE ASIN: B000KKDUKM ![]() |
Product Description
RS-232 to RS-485/RS422 bi-directional converter.
Average customer rating: |
RS232 to RS422/RS485 conver
Manufacturer: Aten Corp ProductGroup: CE ASIN: B000T5I2F6 ![]() |
Product Description
MODEL- IC485AI VENDOR- ATEN TECHNOLOGY FEATURES- RS-232 to RS-422/RS485 Bi-directional Isolated Converter IC485AI the Isolated Converter is a bi-directional converter that transparently converts RS-232 signals to RS-422/RS-485 signals (and vice versa) thus permitting the creation of reliable long distance communication systems using standard computer hardware. IC485AI provides point-to-point multi-drop and simplex operations over 4000 feet. Designed with built-in optocouplers for exceptional signal isolation plus transformers for excellent power isolation this extremely reliable isolated converter enhances the quality of the data communication. At the same time it protects your equipment from electrical surges of up to 2000 Volts. Includes IC485AI bi-directional isolated converter Power adapter User manual and Warranty registration card. * Automatic internal RS-485 bus supervision * No external flow control signals for RS-485 required * Transient suppression on RS-485 data lines * Data transmission controlled by the RTS signal * LEDs for easy status monitoring * DCE/DTE selectable * Point-to-point multi drop and simplex/duplex link selectable * Four full duplex wires; two half duplex wires * Supports up to 32 receivers to be set in multi drop installations * Reach up to 4000 feet (1200 meters) through networking cables * Support transfer speeds of up to 115.2 Kbps * Maximum 2000V Isolation Protection * Compact size -- SPECIFICATIONs -----------------------------------CONNECTORs - Input : (1) DB25 female (for RS232) Output: (1) 4 Post Terminal Block (for RS422/RS485) (1) Grounding TabDATA RATE - Up to 115.2 Kbps under 1200 m (4000 ft.)CABLE DISTANCE - Up to 1200 m (4000 ft.)DIP SWITCHES - Segment 1
Average customer rating: |
RS232 to RS422/RS485 conver
Manufacturer: Aten Corp ProductGroup: CE Product Features:
ASIN: B000VMURKU ![]() |
Product Description
MODEL- ATENIC485S VENDOR- ATEN TECHNOLOGY FEATURES- RS-232 to RS-485/RS-422 Bidirectional Converter The IC-485S is hardware solutions to the problem of converting signals between two standards. Data transfer can take place at up to 1200m (4000 feet) over four or two wire cable for full or half duplex respectively. The converters can handle any RS-485/RS-422 device allowing it to function as a short haul modem or interface converter. Request to send (RTS) selection allows up to 32 receivers to be set up in a multidrop installation making for a cost effective network configuration. The IC-485S is a bi-directional interface converters for RS-232 and RS-485. With the IC-485 series it provides Point-to-Point Multidrop and Simplex operations. The IC-485S also provides an extra Monitoring function. Two slide switches are used to configure its operation mode contention control and assignment of the RS-232. Includes IC485S bi-directional isolated converter Power adapter User manual and Warranty registration card.* Data Transmission Controlled by the RTS Signal.* DCE/DTE Selectable * Point to Point Multidrop and Simplex/Duplex Link Selectable * Four Wire Full Duplex/Two Wire Half Duplex * Monitor Configuration Support * Compact Size -- SPECIFICATIONs -----------------------------------CONNECTORs - Input : (1) DB25 female (for RS232) Output: (1) 4 Post Terminal Block (for RS422/RS485) (1) Grounding TabDATA RATE - Up to 115.2 Kbps under 1200 m (4000 ft.)CABLE DISTANCE - Up to 1200 m (4000 ft.)HOUSING - Plastic (ABS) caseSIZE - 2.2"w x 3.2"h x 0.8"d WT.- 2.1 oz.MANUFACTURER WARRANTY: 1 YEAR
Average customer rating: |
RS232 to RS422/RS485 conver
Manufacturer: Aten Corp ProductGroup: CE ASIN: B000NWWX3M ![]() |
Product Description
RS-232 to RS-422/RS485 bi-directional converter with multidrop & isolated surge protection.Cheap Consumer Electronics: