Product Description
Speaker mounts - Black - 5-Mounts - wall/ceiling - holds up to 10 lbs. - perfect for Home Theater solutions MANUFACTURER WARRANTY: 1 YEAR
Customer Reviews:
good for the money.......2007-10-22
These mounts work great. My only complaint with them is that since they are plastic, if you overtighten one of the bolts you'll ruin the mount. They come with plenty of mounting options depending on the speakers you are installing. I bought these mounts for an onkyo system and the speakers are roughly 6" by 10" and these mounts work great. They include all the hardware you would need to secure them to the speaker and the wall itself.
These mounts helped finish off my new home theatre room with the look of a professional instalation.
Great Deal.......2007-09-10
These mounts are the best buy for your money.....I have a 7.1 system and used these for my surround speakers.......If you speakers weigh more than 7lbs I would suggest using the B-Tech BT1 mount which is great for heavier speakers which is what I used for my front left/right speakers and I used the B-Tech BT33 for my center.....
Great product at a great price!.......2007-09-05
I got this product not really expecting much but it is a bargain. I didn't give it 5 stars just because it isn't all the best thing since sliced bread. But for those wanting an inexpensive wall mount kit, this is it. It is high quality and you won't be disappointed with your purchase.
BUDGET SPEAKER MOUNTS.......2007-08-24
FAIRLY SOLID CONSTRUCTION. THE MATERIAL HAS A LITTLE TOO MUCH FLEX AND THE MOUNTING SCREWS CAN BE FORCED THROUGH THE HOLES. IT IS NOT REALLY A PROBLEM IF YOU ARE CAREFUL. IN GENERAL PRETTY GOOD, FOR THE PRICE AN EXCELLENT VALUE. THIS IS THE SECOND PURCHASE OF THESE MOUNTS FOR ME AND I WOULD NOT HAVE ORDERED THEM AGAIN IF UNSATISFIED WITH THE FIRST ORDER
good mounts at a fair price.......2007-08-23
This is a good option if you do not want to spend too much. There are couple of catches that I think you should be aware of:
1. Mounts are made of plastic
2. There is no conduit built within the mount through which you can run speaker wire.
Average customer rating:
- worth every penny
- So far, so good...
- Upside-down mounting the way to go!
- Very functional with slight room for improvement
- Exactly what I needed, only one that I found would work
|
OmniMount CCH1B Center Channel Speaker Shelf
Manufacturer: OmniMount
ProductGroup: CE
Binding: Electronics
Accessories & Supplies
|
Refurbished & Used
|
Special Features
|
Electronics Features
|
Electronics
Mounts
|
Accessories & Supplies
|
Categories
|
Electronics
|
Computer & Monitor Mounts
|
Projector Mounts
|
Speaker Mounts
|
TV Mounts
Similar Items:
-
Sanus Systems EF-SATB Euro Foundations Adjustable Satellite Speaker Stands, Black (Pair)
-
Sony Bravia SXRD KDS-60A3000 60" 1080p Rear Projection HDTV
-
Sony Bravia SXRD KDS-50A3000 50" 1080p Rear Projection HDTV
-
DAYTON SS-SAT SATELLITE SPEAKER STAND BLACK PAIR
-
Sony SU-RS11X TV Stand for KDS-55A2000 or KDS-60A2000 Rear Projection HDTVs (Silver)
Product Features:
- Adjustable support legs fit CRTs, LCDs, DLPs, and other projection TVs
- Supports most any center channel speaker or, DVD, VCR, cable box, satellite or HD receiver
- Low profile design
- Black in door
ASIN: B00067AIEU
 |
Product Description
Products from OmniMount Systems are recognized for their groundbreaking design, highest quality, and long-term reliability. Today OmniMount offers hundreds of mounting solutions to meet the needs of nearly any application.This product is a center channel speaker shelf.
Customer Reviews:
worth every penny.......2007-12-11
I am the DIY type, so I usually tend to build things like this myself, but this shelf works as advertised and it is worth every penny. My center speaker sits now on the top of my Panasonic LCD projection TV, where it should be and even the wife does not complain ;-) ...
So far, so good..........2007-12-08
I have a Sharp 37" LCD and it is very thin. I was going to ship the stand back because the legs were about 5 inches from the tv. She suggested moving the legs forward a few holes. So far it looks and seems fine. I have about a 10lb speaker on it as well as a HD Cable receiver. If they crash, I will lose a lot of money and possibly damage the TV. I will see how it lasts for about a month, and if it works I will probably buy another.
Upside-down mounting the way to go!.......2007-11-25
As suggested by another reviewer I tried mounting the shelf upside down on my Sony KDS-60A3000. Good idea! The shelf is "invisible", with only a slight lip extending over the silver bezel of the TV. The pegs designed for right-side-up mounting would have extended into the screen.
As far as those reporting the shelf collapsing, I have not had any problems. Just don't over load the shelf; be certain that all set screws are tight and clean the area where the pads connect to the back of the TV.
Highly recommended...and you get better sound when you get the center speaker above the TV.
Very functional with slight room for improvement.......2007-10-31
First off, let me tell you that this is an excellent shelf for mounting a center channel speaker above your TV. I am using it to mount the center speaker in my Onkyo SKS-HT540 speaker system. The speaker is a little over 8 lbs. so it is well within the weight limits of the shelf. I chose to mount the shelf upside down as explained here by another reviewer as this method looks much better in my opinion. Since the top of my TV is quite a bit higher than ear level I had to angle the center channel speaker down quite a bit. This concerned me because I was afraid the speaker may slide off over time from the vibrations. Just to be on the safe side I used the pins left over from mounting the shelf upside down as a barrier in front of the speaker so that it has no way to slide forward and come crashing down on my glass TV stand. That would not be good at all.
One final note that may be of interest to some people. I bought this shelf to go on top a my very slim Sony Bravia 52" xbr2. This is where OminiMount could slightly improve this product. If they just included some longer legs with this unit than the 4" and 11" ones that they have in the box, then they could market it as being able to fit any TV as opposed to just projection, DLP, cabinet-style TVs. I knew about the mounting problems I was going to run into beforehand as this product was clearly not intended for slim flat panel TVs, however, it was pretty much my only option. So, a quick trip down the road to Home Depot and $7 later I had my mounting issue under control. I bought two 3' aluminum rods that perfectly matched the diameter of the receivers that the stand uses. I cut a couple of inches off of the rods so that they were the right length from the base of the shelf to the top of the TV stand. Worked well for me, was easy to fabricate a quick fix, and is very sturdy.
Exactly what I needed, only one that I found would work.......2007-10-18
I own a KDS-60XBR2 and wanted to mount a center channel that was about 14" wide and 10" deep. This mount was perfect for the fit on top of the TV. Only problem I have with it is the front two "peg feet" are steel with no padding, so I suggest getting some foam pads to place underneath them before placing it on the front edge of your TV as they will scratch it. The rear feet come with double sided adhesive foam pads that work well. I personally only peeled off the side to stick to the shelfs feet and left the paper backing on the side touching the TV since I wasn't sure how hard it would be when it was time to remove it. Overall works great and is very reasonably priced. It has enough adjustment options to accomodate most new projection TV's but not the newest super slim cabinets and definitely not a plasma or flat screen LCD.
Product Description
For Onkyo HT-S907 and HT-S894 home theater system satellite speakers * black finish * hidden wire path in column * stand height: 43" * base plate: 10-5/8" diameter *
From the Manufacturer
The Onkyo AS-240 Speaker stands feature adjustable height and hidden speaker cables. The stands fit Onkyo speaker models LSV-955 and SKS-HT240.
Customer Reviews:
These mounts are not very good.......2007-12-11
Speakers does not mount correct. Screws does not fit into the base either. Do not buy this set...
Works great with the Onkyo HT750 speakers.......2007-11-30
I got these speaker stands with the Onkyo HT-SP908 7.1 Channel Home Theater System. Onkyo hasn't updated their product page to list them yet, but they are perfect for the Onkyo SKS-HT750 speakers included in that system. The stands are sturdy and include a spacer that allows you to select a speaker height of either about 36" or 43"
I think they look great. Not that much more you can say about a speaker stand...
Onkyo Speaker Stands (AS240B) Money Well Spent.......2007-06-15
The stands themselves were better than I expected. They are very sturdy. I also liked the weight of the stands. We have several pets and I am not worried about them knocking over the stands. My only dissapointment was the M4 screws that attach the base to the pipe. I ended up substituting high quality stainless steel screws to get a real good grip into the pipe threads.
Nice looking, good quality.......2007-04-10
These are very heavy and good quality - they don't look or feel cheap at all. I got them for my Onkyo speaker set and they look perfect together.
Best price, fast delivery.......2007-01-16
Saved $100 buying online vs. discount national electronics store, easy choice and delivery was faster than expected.
Product Description
adjustable height (28" to 42") * adjustable floor spikes and screw-in rubber feet for added stability * includes 2-1/2" x 3-1/4" top plate, 5" x 5" top plate, and "L" bracket for mounting versatility * speaker cable management system conceals wire path * black, silver, or white satin powder-coated finish on tubular uprights * solid metal tri-corner base (for black and silver models, base is black; for white models, base is white) * each stand supports a maximum of 10 lbs. * base dimensions: 12-3/16"W x 10-5/8"D * warranty: 1 year
Amazon.com Product Description
Give your satellite speakers a sleek, contemporary foundation while also improving their audio performance with these Sanus adjustable speaker stands. Boasting a European-style profile and a durable powder-coated black finish, the stands suspend your home theater speakers at the ideal listening height--from 28 to 42 inches depending on the height of your chairs or couch--letting you sit back and enjoy the full splendor of your surround sound system. Each stand also features a cast-iron base engineered for solid support, along with your choice of premium adjustable floor spikes or custom screw-in rubber feet to provide stability and minimum resonance on any floor surface. Meanwhile, the steel top plate includes custom speaker isolation pads to further enhance the sound quality. A further bonus stems from the stands' concealed wire path, which hides your speaker cable from view to improve the room's overall aesthetics.
The stands fit most satellite speakers weighing 10 pounds or less. Some assembly is required, though it takes just a few minutes using a Phillips screwdriver. The stands are also backed by a five-year warranty.
What's in the Box
Two high-mass base plates, two adjustable-height pillars, two medium top plates, two small top plates, two L-shaped speaker brackets, two Klipsch Quintent brackets, two Klipsch RS brackets, two threaded stud mounts, six pad feet and six carpet spikes, eight speaker isolation pads, assembly hardware, user's manual.
Customer Reviews:
SANUS EF-SATB adjustable speaker stands.......2007-11-25
Other reviewers described how these speaker stands worked well or not quite so well in various situations. These reviews helped me decide to try them - my surround speakers are flat bottomed about 6.5 inches wide and 8 inches long and weight 7.5 lbs. The largest top plate or speaker support plate included with the stands is 5 inches square. Sanus does include many different brackets, parts and screws with the stands. I wanted the speakers to just sit on top of a plate or "table". Off on a trip to Home Depo where I bought 2 pieces of 8 X 10 inch lexan (for 8 X 10 picture frames) for $3.00 each and a roll of double-sided tape for $5.00. I cut 4 inches off the 10 inch side with a small hand saw to make a 6 X 10 inch "table" and used four pieces of the double-sided tape to stick this to the 5 inch plate included with the stand - after first screwing the 5 inch plate to the speaker "pole" - it is not beyond me to afix the lexan to the 5 inch plate first - and then realize I can't screw the plate to the pole because I just covered the screw hole!!!LOL. I sanded smooth the sawed side and used four 1 inch felt feet on the speaker All this turned out ok. Also used 12 gauge speaker wire. This threaded through the bottom pole slot ok - tough getting it through the smaller top slot. Used straightened paper clips and needle-nosed pliers to make hooks on the paper clip ends - had to use two - to get the wire started through the pole top slot. Pushed wire through the bottom and wiggled it through the top slot to get about 10 inches - enough to connect to bannana connectors in speaker. It's been said that these stands won't do well with heavier speakers and I also don't think they would do well with any speaker over 10 lbs.. Good luck..
Nice stands for the money........2007-10-31
The price was right on these stands and they go very well with my black side and rear surrounds of my Onkyo SKS-HT540 speaker system. Sturdy, nice looking, and not too expensive.
(P.S. They match the Sanus EF24B stands very nicely that I used to mount my front speakers.)
Better than expected.......2007-09-08
I received my four Sanus System speaker stands and was pleasantly surprised by their quality, and by how easy they were to assemble. They fit and hold my Klipsch Quintet speakers perfectly -- with the brackets specially designed for this model of speakers. The stands also come with several plates that fit a variety of speaker types.
The stands are easy to adjust up and down, and are not top heavy with my speakers. While the black coating is very nice, it is loosely bonded to the metal. I dropped a screw on the floor plate and it nicked the paint to bare metal.
By the way, I found the instructions easy to understand and follow, so perhaps they have been updated.
Here's a tip during assembly, especially if you are using 14-ga lamp cord: insert the cord into the tubes before you screw the tube to the floor plate.
Final comment: great stands at a great price. Highly recommended.
Fits JBL SCS300SAT / SCSSAT300.......2007-08-16
I went through numerous "universal" stands, none of which fit the JBL satellites (SCS300)since they are oddly shaped speakers. The main mounting hole in the middle of the pole fits the odd pole mount that comes with the JBL speakers. Just screw the pole on the base and scre the speaker onto the pole. Piece of cake.
Nice looking stands and sturdy.
I have an old pair of Sanus stands that also had the appropriate hole so I'd assume any sanus stand should fit the JBLs but can't confirm.
Works great.......2007-07-30
I did a lot of research before I got these speaker stands. As it turns out, I have Infinity Modulus surround speakers and I wanted something easily compatible with them. These stands, though they don't mention it, contain something called a Modulus stud that screws into the ball on the bottom of the Modulus speakers. They work really well, though the bases are a little larger than I would have liked to have had. They will definately support a large speaker. The Modulus speakers are about 6 pounds and there was no problems with the weight.
Product Description
The 2-pack Universal Speaker Mounts are ideal for satellite speakers in a home theater system. Fits most brands of speakers.
Customer Reviews:
good little speaker mounts.......2007-05-29
I just wanted small speaker mounts for my rear speakers of my souround system. These are a good small size for this and match the gray/black of my curent speakers as well.
Premier Mounts PSPK-2B Universal Speaker Mount for Walls and Ceilings (Black).......2007-04-13
I like them a lot; good deal!!
Product Description
Made from high quality black MDF fiber-wood Stylish curved base with beveled edges Simple assembly within minutes Hand-sanded black satin finish Hiden wire path Includes adjustable floor spikes, rubber isolation pads and wire guides
Product Description
Wood - Black
Customer Reviews:
Good product but not quite as advertised.......2007-09-28
These are pretty solid pieces for the price but as other reviewers have discussed, they are certainly not the satin quality you may be led to believe. But most importantly, Amazon has the wrong product number on one of their links. Be sure to check the model number...WC-17.5 are actually the 17 1/2 inch versions, not the 23 inches listed on the dimensions. Amazon has both - just make sure you check the model number and order the ones you want.
Functional and Affordable.......2007-09-27
Easy to put together, took me less than 10 min, excellent price, great finish, stylish, I use it with my old bookshelf speakers,matches my black TV stand perfectly.Got it with no damage and on time.Perfect hight.Has speaker cable guide for concealment.
Not as advertised.......2007-08-10
These are "OK" stands, but not as advertised. These are in no way "Black Satin". Also, this model is WC-17.5...well, it would seem obvious that they are in fact 17.5 inches tall, NOT 23 inches as in the description.
don't like the finish.......2007-08-08
These are not what I thought I was getting. I expected the "black satin" finish to be that low gloss black wood grain type finish commonly seen on bookshelf type speakers. Instead, it's a rough black powder coat finish directly on MDF particle board. It looks like countertop formica instead of wood. As a woodworker, I have always understood a "satin" finish to mean a smooth finished surface with a subtle luster (as opposed to a glossy polyurethane finish). It seems pretty misleading to advertise these as "black satin wood" speaker stands. There is nothing "woodlike" about them.
Nice little numbers.......2007-08-05
These are easy to assemble with just a phillips head screw-driver in about 10 minutes max. They are durable, they look nice and they are sturdy. I other words - as advertised. Highly recommended.
Product Description
Matching stitching Surprise contrasting design element on front & back panels Main FeaturesManufacturer: Atlantic, IncManufacturer Part Number: 63204457Manufacturer Website Address: www.atlantic-inc.comProduct Type: CD CaseColor: Black Material Details: Leatherette - Perforated and smooth Dimensions: 13.25" Width x 12" Height x 3.5" DepthCompatibility: CDs/DVDs
Product Description
Black
Customer Reviews:
Simplicity is the name of the game........2007-12-14
I bought the Logitech Z-5500 speakers, but I didn't want to screw them into the wall. The problem with these speakers is that they don't fit (screw) into the 'standard' speaker stands.
The solution: The Gallery Noir Wood/Glass Speaker Stand. I have them set up on either side of my couch. The design is simple, but elegant. The top shelves are sturdy and have more than enough strength to hold any small speaker set out there. The middle selves are supposed to be used for storing DVD's, CD's or Games. It works fine, so long as they are ALWAYS filled with cases. If 1 case is pulled out, the rest sort of fall onto each other, so I would recommend getting a 'real' media storage center. What I used the shelves for was items I wanted on display. A mini bust, a trinket or just put a coaster down and use it as handy, accessible and not in your way place to hold your drink. Great for those without a coffee table, like me.
The assembly was easy and took about 3 minutes. The packaging seems small but protects your item well.
I just bought another set of speakers for the bedroom and will be buying another pair of these speaker stands to hold them. Definitely recommended for those who want a nice, simple and sturdy item. Something that wont be easily knocked down by mischievous cats.
Nice stands.......2007-07-21
I don't have all that much experience putting things together, so I was a little worried because of one reviewer's comments about the instructions being hard to understand. On the whole, I found that they were fairly simple to put together, and the diagrams were very helpful.
There's unfortunately no way to thread cables through any part of these stands, so if you're looking to keep your cabling invisible, these might not be the stands for you. I'm using them for my rear speakers, and they're pretty small (small enough that I would be able to fit one on the top shelf and another on the bottom), so I don't have any problems with instability, though I think it might be an issue for people with larger, heavier speakers on carpet.
Poorly Made Product.......2007-04-11
This product was totally disappointing. The directions were difficult to follow, there were only poorly draw diagrams to describe the construction. The product is very flimsy and unstable. I will not use it for the purpose of placing my Paradigm speakers, nor would I purchase this product again or any other product of this type. I have been completely unsatisfied with this product. Finally, during assembly of this product I somehow managed to chip the frosted glass shelves because the rods for the stand came in a somewhat bent manner from the package
Thank You.
Very Nice.......2007-02-27
These stands were easy to put together and look very nice. They blend in with the TV and other AV components, so they would go nicely with any decor. They also had a pretty reasonable price. I would definitely recommend them.
Product Description
Made from high quality black MDF fiber-woodStylish curved base with beveled edgesSimple assembly within minutesHand-sanded black satin finishIncludes adjustable floor spikes, rubber isolation pads and wire guidesSpecial handling fees apply
Cheap Consumer Electronics:
- Prepac BPS-4200 42" Plasma TV Console with Media Storage - Black
- Prepac BRO-0645 Black - Locking Media Storage Console
- Prepac MTV-3232 Maple Tall Corner TV Cabinet
- Prepac VM-0896 Grande Mission Style Locking Media Cabinet with Solid Oak Doors
- Prepac VM-0896 Grande Mission Style Locking Media Cabinet with Solid Oak Doors
- Riverside Furniture A Splash of Color Entertainment Armoire in Shores White 1240S
- Riverside Furniture Bravo Entertainment Series Bravo 60" TV Stand Entertainment Center with Pier Cab
- RUSH Entertainment BASE, Charles Harris, Dark Cherry finish, 23.5H x 69.625W x 21.75D
- Salamander Synergy 329 A/V Cabinet w/ Two Doors & Center Channel Shelf (Cherry/Black)
- Santee Dark Oak Finish Right Entertainment Pier
Cheap Consumer Electronics List
Cheap Consumer Electronics
Onkyo HT-SR800 7.1 Home Theater Entertainment System (Black)
Onkyo HT-SP908 7.1 Channel Home Theater System
B-TECH BT1 Universal Speaker Bracket for Small Speakers (Pair per box)
Sony HT-DDW990 Component Home Theater System with Digital Media Port
Premier Mounts PSPK-2B Universal Speaker Mount for Walls and Ceilings (Black)
