Product Description
The SmartMount for 32" to 50" flat panel screens provides a versatile and secure solution for professional environments such as boardrooms, hotels and stadiums. This mount offers smooth, continuous one touch tilt, allowing for easy adjustment to achieve the perfect viewing angle without tools. The mount includes simple to align universal brackets and a unique wall plate that can be mounted to two wood studs up to 24" apart, or concrete. For easy installation the mount is preassembled and includes a Sorted-For-You baffle pack with all screen hardware and security fasteners.
Customer Reviews:
Peerless ST650P Tilting Wall Mount 32"-50".......2007-12-27
Bought two of these for 46" LCDs. Heavy Duty and very secure once mounted. Two considerations. Plug in all connections to tv before hanging on bracket. Need small hands to adjust manual thumbscrews for tilting.Looks great on the wall.
Easy Install, yet Disappointing Tilt.......2007-12-27
I bought this wall mount for my Sony Bravia 46" LCD, which I also purchased at Amazon. It was an easy install using the enclosed hardware and following the directions. Didn't take long before it was up.
The description stated tilting wall mount, so I bought it instead of the regular one, which was a little cheaper. I guess I should have read the description more thoroughly. It only tilts downward at a very slight angle, but more upwward. I would assume that most people tilt downward, as they probably hang them above fireplaces, etc. Therefore, I was hoping (assumed) to have a bit more tilt.
I'm not dissatisfied whatsoever with the product. But I could have paid less with the same result. Overall it was a good purchase.
Great Mount for Sharp Aquos.......2007-12-25
The mount worked very well. It was easy to install and had great instructions which covered every possible configuration.
Compared to the overly expensive models at the retail stores in my area this price could not be beat.
Great Bracket for your Flat Panel.......2007-12-25
I installed this bracket in about 2 hrs. with my dad's help. I put a 32" Sharp Aquos on it. It was really easy to get on the wall and then place the LCD panel on it. The only thing I regret is that it doesn't allow me to get to the back of my unit without having to uninstall it. Luckily all my component and HDMI slots were used up, so now when I get a new item, I just replace it with whatever I'm discarding.
Good Mount.......2007-12-25
I bought this to go with my Toshiba 47HL167 LCD TV. It hooks up easily, comes with an amazing number of bolts so it can hook up to any TV; but they are separated in nice little pouches so finding what you need is easy. It attaches to a stud wall with 4 screws and installation is quick.
This is the only mount I've used, but I can't see what a $150 mount would offer you. So long as it doesn't crash off the wall - that's really all you need. It also pivots but I set mine vertical.
The hardest part was deciding where to mount it. I used blue painters tape to layout a 'TV' on the wall and looked at it from lots of angles, chairs, sofas, etc. My first inclination was to go too high, I found that was uncomfortable on the neck. Final TV center height is 50". This is comfortable to look at from a chair, but also high enough to view while laying on a couch (and looking above your feet). But your room and furniture will be different - so try the "tape" TV for 30 minutes of so.
Product Description
The Articulating LCD Wall Arm supports 22" to 40" LCD screens. With internal cord management this mount folds flat against the wall or extends out up to 20". Its anodized aluminum finish elegantly complements offices, conference rooms, merchandising displays, hotel rooms or any room in the home. This two-link arm provides easy one-touch tilt and up to 180 degrees of swivel for virtually limitless viewing positions. Unsightly cords are routed internally within the arm to maintain the clean look of the installation. Ships pre-assembled for fast and easy installation.For a complete compatibility list please refer to the original manufacturer's web site.
Customer Reviews:
Quality product.......2007-12-26
I looked at several mounting units in the Big Box stores and they were poorly made. This Peerless mounting unit is well designed and the quality is incredible. Adjustments are easy and hold firmly. Another reason for my selecting this one was the availability of the black color to match the T.V. I helped my neighbor install a different brand a few weeks ago and after fastening the bracket to the wall we had to hold the T.V. up to the unit while trying to align the screws to attach it (Not easy). This Peerless allows you to install the bracket to the wall and then screw the mounting plate to the T.V. while it is placed on a table (padded) and then lift the Screen and slip it into the secure slot arrangement making it a one person easy install. I would buy this product again and also recommend it highly.
No Regret.......2007-12-20
Product Pro: This mount is heavy and sturdy. Best of all, not only are the pieces solid, but the joints attaching each of the pieces feel smooth and secure. It's designed so that once you articulate the arm, it stays where you want it to stay. The TV wasn't directly at the foot of the bed, so the fact that this articulated in all direction and at a low price, sold me.
Product Con: Nothing really, except for the fact that this entire thing is held up by 2 screws. That makes installation simple, but it took me a while to not worry about it.
Installation Pro: Easy two screws. The attachment to the TV was a series of 4 screws and the bracket fits perfectly. On the wall, just make sure you make the pilot holes deep. Mounting the TV was so easy that I was doubtful the two brackets were actually aligned and hooked up, so I refused to let go.
Installation Con: The screws that mounts to the wall had a hard time digging into the stud. Seems like other screws I've used had sharper edges which made it easier to just drill into the wall. I ended up having to take the screws back out and drill bigger and deeper holes just because I didn't want to end up stripping the screw head or even breaking it off.
Overall, price, quality, and the ability to articulate the LCD in all direction got me to give this a 5 star. Peerless just won me over, that I am getting there glass shelves (PM610G), which I'll mount beneath the TV. All matching color.
Great LCD TV Wall Mount - Peerless Articulating LCD Wall Arm.......2007-12-18
I found this product on Amazon, read the specs and decided to give it a try. The price was right and it was shipped quickly without requesting expedited shipping. Instructions included were clear and simple to follow. All you need to know how to do is handle a drill (makes installing the stud screws easier by drilling pilot holes), a tape measure (for picky installers who like things centered) and a level (again - picky installer me). Simple to mount the TV with many possible hole patterns for all the mount specs (50x50, 100x100, 100x200, 200x200, etc). Once secured to the bracket, the TV moves easily in/out, up/down, and left/right. Very well balanced. Love this product.
Great, but fell off the concrete wall!!!.......2007-12-18
I installed this last weekend and I only give it four stars because of the concrete anchors. I drilled the holes into my concrete wall using my hammer drill and used the anchors that they supplied, which are cheap plastic anchors, around 1" in length, whereas the screws are 2" WOOD screws. I had to use my new powerful 18 volt drill in order to get the anchors securely inside. There was just no way that you could screw the 2" screws into the wall by hand. It took all of my drill's torque to do the job. Everything went as planned and I was marveling at the job. I connected the cables on the floor and I was stunned when the 40" lcd (~70 lbs) fell on my head out of the wall. No kidding, it nearly knocked me out, but luckily it only cut my lip. Miraculously it did not damage my lcd or my dresser that it hit on the way to my head. After regrouping, I went to Home Depot and purchased the anchors I should have started with. I have installed many, many items in my concrete walls and have a lot of previous experience as well. I have never had a problem...because I used the appropriate anchors. I used some acorn hex anchors that worked beautifully. They are designed so that if the mounts pulls against them, rather than ripping out of the concrete, they get even stronger by expanding more. These are the type of anchors that should be included with the mount. Under no circumstances do I recommend using the supplied anchors unless you want a broken tv and to be knocked out. I can't stress this enough. I was very lucky this time.
Fantastic Product.......2007-12-13
Considering the fact that it will cost you over $200 to buy an articulating Arm if you buy the one's that they peddle at BestBuy or some other electronics store, this Arm is an absolute STEAL!! It took me 20 minutes to set up and most of that was spent trying to find the beam and screw those crazy long screws in. I have my 32" LCD in a very narrow room so it HAD to go in a corner. The arm did the trick and it looks professional. I even painted the room after and didnt have to take the TV down. I just swung the Arm out one way, painted the area, and then swung it the other way. You dont even have to be any good at hanging things because if you dont put the thing up straight, no worries - The arm adjusts in just about every angle and every direction.
For the price it cant be beat. I highly reccomend!
Product Description
The SmartMount Universal Flat Wall Mount supports virtually any 22" to 49" flat panel screen. The ultra-slim wall plate keeps the screen close to the wall for a very discreet installation that is perfect for boardrooms, digital signage, or home theaters. The mount includes simple to align universal brackets and a unique wall plate that can be mounted to a single wood stud, two wood studs up to 16" apart, or concrete. Includes a Sorted-For You baffle pack with all screen hardware and security fasteners.For a complete compatibility list please refer to the original manufacturer's web site.
Customer Reviews:
Almost great TV mount.......2007-12-26
First, let me start by saying I am blown away by how quickly Amazon filled this order. I placed the order on a Sunday, taking advantage of the standard (free) shipping, and was quite surprised when I received the order the following Wednesday.
The TV mount worked exactly as described, and came with an assortment of screws and other mounting hardware to do the trick. No extra trips to the hardware store - almost. Much to my chagrin, I discovered that when trying to hang my LG flat panel on the wall, this mount didn't extend out enough to allow the AC power cord to plug into the outlet I had located behind the TV. The TV plug projected from the wall about an 1 1/2", requiring me to go to the Depot to purchase a recessed wall outlet, like the ones used for hanging clocks.
My only other comment is that the set screws used to secure the TV to the mount are accessed using a very long allen wrench, and in order to turn them, you must crouch down below the hanging TV and carefully turn the wrench. This isn't terrible, but when the mount is flush against the wall, like this one is designed to fit, you are only able to get 3/4 of a turn of the wrench before you must take it out, and carefully reposition it in the allen screw. The whole process of securing the TV took about 5 minutes.
Have to say, all in all - this mount cost about half what a comparable mount at Best Buy would have cost - and does the trick nicely.
Excellent Wall Mount for the Money.......2007-12-18
I'm using this wall mount with a 37" Olevia LCD TV. It was very easy to install, and the TV is easy to mount and dismount (when needed). Just make sure you screw into wall studs, and not just drywall.
Great stand for the price.......2007-12-11
Seems very well built, and it comes with a ton of extra screws. The only problem is that I can't reach the "safety" screws on the bottom. I am not really concerned because even without those screws it would be just about impossible to knock the TV off the wall. It's working great with our Sharp Aquos 46" LCD.
There is an application guide on Peerless's website if you want to make sure it will fit your TV.
Good value for the money.......2007-11-30
I bought this wall mount for a 32" Vizio. I had to make some modification with the hardware, which wasn't a big deal, and then it went up in about 30 minutes. I took back the Vizio and bought a Toshiba from Amazon, and it went up even more easily. The installation seems very stable.
Delivery was fast and the price was great.
Awsum.......2007-11-30
Very impressed. First time using Amazon. Ordered this on Sunday Night, on my door step Wednesday. Cheaper to wait a few days then go an buy at walk in store. Great wall mount.......
Product Description
The Peerless LCD Flat Panel Articulating Wall Mount provides a cost-effective mounting solution for 10" to 22" LCD at panel screens. Extremely exible, this mount folds at against the wall to a slim 2" depth or extends out up to 15.25". Its silver nish elegantly complements of ces, conference rooms, merchandising displays, hotel rooms or any room in the home. This two-link arm provides easy, one-touch tilt and up to 180 degrees of swivel for optimal screen positioning. The LCS-KLA comes completely pre-assembled for a fast and easy installation.
Customer Reviews:
Great LCD Wall Mount.......2007-12-26
This is a very nice stand for the money. It holds the position of the 19 inch LCD TV very well. Tilting the TV up/down works fine, my TV has never lost its position. It seems to be well made, very stiff and hardened. Installing was easy as pie.
I'm very happy with this mount.
Used for a 15" TV - Great results.......2007-12-25
I really like this bracket - the quality is very high and it is a very heavy well constructed unit. We only hung a 15" LCD TV from it, but it felt much stronger like it would hold a much larger unit. Overall I couldn't be happier with it. If it had been a bit less expensive, I would have given it 5 stars.
Better than expected.......2007-11-30
It provides a lot more movement than you'd expect for such a small mount. Extremely solid construction. There's no wobble or play in the joints. This could easily hold a much bigger monitor than it's rated for, if the larger monitor provides the 75/100mm VESA mounting pattern. It looks nice to boot, and it's half the price of similar items elsewhere. I bought half a dozen in case it ever gets discontinued. Don't pay over a hundred dollars for any kind of monitor mount unless it's got remote control motorization and washes your dishes. Flat Panel screens are still considered "new" technology, so vendors are still charging premiums for the accessories. Not so in this case.
The first bracket to be installed was for mounting a 22" computer monitor in the center of the picture window in front of my desk. The view out the window is of Diamond head here in Honolulu, so naturally when not using the monitor I wanted to swing it out of the way to enjoy the scenery. I screwed the base (comes with beefy screws) onto the inside of the window frame. When fully extened flat against the window, the mounting head is rotated 90 degrees so that the monitor faces the desk. I can pull the monitor forward a little to read fine print. I can swing the whole arm to the outside of the window frame and turn the mounting head 180 and still see it, although to the side of the window. I can pull it out perpendicular to the window and swivel the head to face anyone that steps into my office. Naturally you need a long enough monitor cable and power cable for that much movement if your also going to tie those cables to the arm so they tip your coffee cup.
Not what pictured here or Peerless' PDF!! Specs wrong too!.......2007-11-29
I'm downrating this product BEFORE I actually use it to hopefully catch your attention BEFORE you buy it! I read a bunch of reviews here, mostly favorable. One noted the itme pictured here on Amazon is different then what came. TRUE. It is also DIFFERENT than the item in the PDF from the Peerless site!! Seems there are 3 LCS-KLA'a but nobody (Peerless) has bothered to revision them ie. -1 -2 -3 etc. What I thought was the one in the PDF was the correct one, WRONG. The one pictured on the Peerless site IS the correct one. So it has a flat/squareish TV side plate with eight ROUND screw holes (not tear shaped) and it does NOT roll +/- 5 degrees. If you've ever hung a TV before tear shaped screw holes let you hang the TV on the already wall mounted arm EASILY! The 5 degree roll lets you correct a less than perfect install. I'm am currently waiting for a call back from a Peerless tech. I showed the CSR the bad PDF.
Great product.......2007-11-25
This is a great product. I bought this on amazon because it was way cheaper than buying something similar at the local electronics store. Easy to install, comes with all the hardware needed, and fit my tv perfect (20" lcd). Very strong and easy to move around with the tv on it. Would recommend, and I dont have any thing negative to say about this wall mount.
Product Description
The SmartMount for 32" to 63" flat panel screens provides a versatile and secure solution for professional environments such as boardrooms, hotels and stadiums. This mount offers smooth, continuous one touch tilt, allowing for easy adjustment to achieve the perfect viewing angle without tools. The mount includes simple to align universal brackets and a unique wall plate that can be mounted to a single wood stud, two wood studs up to 24" apart, or concrete. For easy installation the mount is preassembled and includes a Sorted-For-You baffle pack with all screen hardware and security fasteners.PRODUCT FEATURES: Fits 32" to 63" flat panel screens; One-touch tilt for effortless positioning and adjustment of the screen; Models available with integrated security features provide effective theft deterrence; Standard models also available; For virtually all 32" to 63" flat panel screens; Adjustable 15? of forward tilt, 5? backward tilt; Self-balancing, one-touch tilt for effortless adjustment; Tilt can be tightened in place if needed; Up to 12" of horizontal adjustment after the screen is mounted; Mounts to one or two wood studs, concrete, cinder block or to two metal studs (with accessory metal stud fasteners); Universal brackets easily hook onto the mount bars for fast installation; Includes additional brackets to accommodate screens with a built-in curve or component box on the back; Includes hardware for wood studs, concrete and cinder block; Comes with Peerless' complete Sorted-For-You baffle pack with all screen hardware included; Screen-specific models are also available.
Customer Reviews:
Sturdy but you may need special screws for your TV.......2007-12-20
The stand is sturdy and comes with quite an assormant of screws for mounting different televisions. I was using it for a Sony W3000 52" TV. It had my TV listed in a book that said which of the sets of screws to use. I tried these and they were too long. It had another set that was the same diameter but they were too short. After reading the manual that came with my telelvision I found out that I needed an inbetween size that did not come with the mount kit. After going to 2 Home Depot's and a Lowes I was unable to find the right size bolts, so I ended up buying a set of washers, and had to use 3 of them for each of the bolts that came with mount kit so that I could tighten them with out poking a hole through the front of the TV. I was actually also surprised with Sony for not including the mounting bolts for their with tv.
Good mount BUT, order the other model for 50"+ sets.......2007-12-20
This mounting system is very strong, well made, and the tilt mechanism works great. The locking screws that secure the TV arm brackets to the mounting plate add an extra level of security.
However, it's a real shame the wall bracket isn't just a couple of inches wider, so it would span 3 studs (on 16" centers). I should have read reviewer G. Knight's comments about this, before ordering.
I should have checked my stud locations before ordering this mount. I discovered that the centerline of my optimal TV location on my wall, was almost directly over a stud. So, I had to shift the mount left to the farthest recommended holes. After mounting the TV on the bracket and shifting it to the right to compensate, the wall bracket flexes by an undesireable amount.
If you are going to mount a 50" or larger TV on your wall, and want a precise placement, I recommend that you avoid this model and go with the ST670 series instead.
On the other hand, if you have a wide latitude for positioning your TV on the wall, or are lucky enough so that your TV's centerline lies directly between two studs (plus or minus 2"), this mount will do the job very nicely. My advice is, determine where you want your TV then check to see if your stud locations are optimally placed, before ordering.
Three stud mount needed for larger, or not centered studs.......2007-12-18
Unit comes with a two stud mount, I am mounting a 60 LG plasma and feel I need Peerless part 200-1901/2. I am finding out that part is about $45 plus shipping. Not available on Amazon and not available retail. Am in the middle of mounting the tv and now I have to wait....something I don't like to do.
Better than the own brand.......2007-12-18
said my installer. I'd add a lot cheaper too. Why on earth should a few pieces of pressed steel cost so much? Better than the Sony (or other brand-name wall mounts) and much cheaper. And by the way, get a local installer, not a chain like Firedog to do the work if you need a wall mount, even one on a chimney. $400 - $600 for a hour's work is simply robbery.
Low profile, strong, option to tilt or lock in place.......2007-12-17
This is a very good choice for a mount if you don't need the ability to swing the TV left or right.
It will handle a great deal of weight, which is not as important with LCDs, but plasmas are very heavy. In my case, I have a Samsung 52" LCD mounted to it, and I feel good knowing I am nowhere near the weight limit.
It is very low profile, which is one of the reasons you bought a flat screen. Why use a mount that holds it farther out from the wall if you don't have to?
It can be locked in five degree increments. So, if you always leave your TV at a certain angle, you can lock it in place and it won't shift over time. I have a much smaller LCD in the kitchen on a fully articulating mount, and I wish I could lock that one as it tends to sag forward over time and has to be readjusted. Very annoying.
There are large screws that have to be drilled into studs to install this. If you have a strong hammer drill, this is a good chance to use it. It cannot be installed without a good drill as the giant screws screw directly into the wall studs to keep all the weight securely mounted. Use a good edge-finding stud scanner to find the center of the studs so that you know the screws are secure.
After the mount is securely affixed to the wall, and the bracket is screwed into the back of the TV, it is a fairly simple matter to just hang the TV on the wall. Just make sure you use two people for the last step so that you can maneuver the television in place without dropping it.
Product Description
The SmartMount Universal Flat Wall Mount supports virtually any 32" to 63" flat panel screen. The ultra-slim wall plate keeps the screen close to the wall for a very discreet installation that is perfect for boardrooms, digital signage, or home theaters. The mount includes simple to align universal brackets and a unique wall plate that can be mounted to two wood studs up to 24" apart, or concrete. Includes a Sorted-For-You baffle pack with all screen hardware and security fasteners.For a complete compatibility list please refer to the original manufacturer's web site.
Customer Reviews:
one out of two.......2007-12-25
only got the mount the company has not sent the TV yet.. said they did not have any more..
peerless SF 660 flat scren wall mount.......2007-12-23
purchased this wall mount for my sony 46" bravia hidef tv paid about 50% less than in the store that i bought my tv from came in just a few days or so free shipping mounted very easy directions were great no problem at all i got the bracket that comes closest to the wall there is also a tilt bracket if you so wish had a little problem before i got it but great customer service dept cleared everything up for me. just make sure this bracket fits your tv once it's up sturdy as can be slides very easy to make sure you get it in the right place you want for the money can't be beat
Works great and easy to install!!!.......2007-12-22
I installed this wall mount and hung my 46" Bravia XBR4 in less than 30min. This is a great item! I is nice that it is completely adjustable when the distance and the location of the beams vary. Great Product!!!
Slim Sturdy and Easy to Install.......2007-12-20
I bought this wall mount for my Samsung 46" LCD. Installation was a breeze. The kit comes with an assortment of screws and a look-up chart so you can cross refernce TV make and model with cortrect screw length. The wall mount was very easy to install. Took approx 20 mins for the wall mount to be secured to the wall studs + 5 mins to attach bars to the TV + 1 min to hang it up. Add another 5 mins to tighten all reamining safety screws.
One word of caution: I strongly suggest you carefully mark the location of the the wall studs. In my case, I wanted to hang the TV in the center of the wall but the stud positioins were not in my favor. As such, I had no choice but to install slightly to the left. The problem is you only have limited room to slide the TV on the maunt/rail to the right before you reach the end of the mount. If your TV allows it, go for the next size up in wall mount. That way, you have more room to sldie the TV left/right to center it in the wall.
Easy-To-Install, Low-Profile, Flat-Panel Mount.......2007-12-17
Used this mount to hang my new 42" Panasonic TH-42PZ77U on the wall. Couldn't have made a better choice. I will start by saying that the packaging/instructions are written by people who speak English, and are very easy to follow. More importantly, this flat-mount provides a very low-profile mount to the wall. This is critical to creating a clean, professional look. This mount trades a "tilting" feature for it's good looks. Keep in mind that this requires you to mount it correctly the first time. The simple answer to this is to resist the urge to mount it too high... Don't do it! 5-6' high looks great when you walk in the room, but as soon as you sit down to watch TV, you'll regret it. Keep the center 4-6" above eye level when seated. Also, Amazon's "Free Super Saver Shipping" turned out to be Overnight! Kudos to the shipping dept. Good Luck to you.
Product Description
The SmartMount Universal Tilt Wall Mount supports virtually any 13" to 42" flat panel screen. The tilting wall plate keeps the screen close to the wall for a very discreet installation that is perfect for digital signage, POS stations, or office applications. Featuring one-touch tilt, the SmartMount allows the screen to be tilted +15/-5 degrees without the use of tools. For a quick and easy installation it may be mounted to a single wood stud or concrete.PRODUCT FEATURES: One-touch tilt for effortless positioning and adjustment of the screen; Integrated security features provide effective theft deterrence; Universal mount fits virtually any 13" to 42" flat panel screen; Screen adapter plates included compatible with VESA 75mm, 100mm, 200mm and 200mm x 200mm mounting hole patterns; One-touch tilt allows tilt adjustment of +15/-5 degrees without the use of tools; Desired tilt angle can be locked in place if needed; Screen adapter plate simply hooks onto the wall plate for quick and easy installation; Security screws lock down the screen for effective theft deterrence; Includes hardware for installation to single wood stud, concrete, and cinder block; UL tested to four times the stated weight load capacity.
Customer Reviews:
Easy to install, works great!.......2007-11-21
I just mounted a 30" Toshiba LCD to a wood stud using this mount. It took about an hour, but I'm usually slow and methodical. Its rock solid. I would buy this product again.
No problems at all..........2007-11-11
Used to mount a 37" Syntax Olivea. Excellent price considering the WM30 wall mount bracket that the manufacturer sells was $90 plus shipping. Installation was a snap...had it up in less than 20 minutes including locating stud, leveling, drilling and mounting. Screws are very long & thick so make sure you find the exact center of the stud and use a drill with enough power to drive such a long screw. Will be buying 2 more for my other flat panels.
Nice heavy material, Very easy instalation.......2007-11-02
This product made instalation as simple as it should be. Very sturdy construction, you don't have to worry about the TV falling as long as you do your part securing it to the wall. Nice product, good price, Highly recomend.
WOW.......2007-08-24
You could do pull-ups on the mount. It is strong, solidly built, and it comes with ALL of the hardware. These guys have done a terrific job of ensuring that this mount is truly universal. Well done!
Outstanding for the money........2007-07-22
I needed a VESA 100x200 mount for my Samsung LN-T2342H 23" LCD HTDV. This was the cheapest I could find for that VESA standard. Do not let the price fool you. The build quality is very nice on this unit. Way better than those "star" brackets. Installation was no problem. Hardest part was finding all my lines. The mounting hardware is top notch. They give you heavy duty wood screws to go into the studs and anchors if no studs. Over 2" screw I think. I had a an issue, based on where I wanted my TV, that only allowed me to use the upper-right most mounting hole for the stud. I proceeded to use the 3 anchors and the supplied screws to mount 2 in the center and one one the left. I then found a replacement wood screw for the stud. Size size. Screwed that in and that baby ain't movin' The tilt function is very nice however the saftey screws are a pain to tighten. No biggie though. Just location sucks. I do wish the wall bracket was a tad wider to allow more left/right movement. The saftey screw issue with a "want" for a wider bracket resulted in a 4 star. Really is 4.5.
Product Description
Mustang MV-TILT3 Low Profile 37-50 inch Tilt Plasma Mount Compatible with nearly all brands of LCD and plasma displays, the MV-TILT3 features a low profile and an ergonomic, lift and hook design to ensure a stylish, secure tilt mount solution. Designed for price-conscious consumers, the MV-TILT3 supports flat panel displays measuring between 3660 inches diagonally and weighing up to 198 pounds (or 89 kilograms). Tilt the mount or use its side lateral on-wall adjustment to reduce glare and create the optimum viewing angle.
Customer Reviews:
Perfect!.......2007-12-10
I got this wall mount free with the purchase of my 50" Samsung plasma. It was easy to mount and VERY easy to hang the TV on. I love how it tilts up and down to achieve that optimal viewing angle.
Works as Advertised.......2007-10-28
Great mount. Easy to install and level. Did show up the fact that my ceiling is not level though.
Wall Mount for flatscreen.......2007-09-11
Super heavy duty wall mount, easy to install and much cheaper than the SONY brand
wall mount.......2007-08-02
nice, easily to install but if you want to have strong bolts you have to buy to good one from hardware store. the lags provided were weak.
Nice!.......2007-07-28
Would have given it 5 stars but it didn't come with a template for drilling holes. Over all very easy to install. I just moved it higher and it took ten minutes.
Product Description
Versatile functionality and solid engineering makes this mount an intelligent choice for boardrooms, digital signage or home theaters. SmartMount Universal Tilt Wall Mounts come with everything you need for a quick and easy install: flat panels engage with an audible click, simple to align universal brackets, 15? negative tilt gives unobstructed access to cables and an open-design wall plate allows easy access to junction boxes and cable management. Plus, the Peerless Sorted-For-You fastener pack eliminates guesswork during installation by making all screen attachment hardware easy to find.
Customer Reviews:
best prices wall mount.......2007-09-28
My husband and I have bought many items on Amazon however I was so suprised when I found this wall mount for $75.00 I bought one at a store and I paid twice as much and it wasn't even near as nice!!! I Ordered this one and took the other one back and I got this one in 2 days!!! It was very easy to but on the wall and even easiter to put the 47" TV on it.
Wall Mount for 40" LCD TV.......2007-06-08
Product conformed to what was ordered. Shipment was timely. Installation is straightforward but time- consuming if done properly. Definitely requires a second pair of arms to lift and safely seat TV onto mount.
Very satisfied with result.
Product Description
This SmartMount for virtually all 22" to 49" flat panel screens provides a versatile and secure solution for professional environments such as boardrooms, hotels and stadiums. This mount offers smooth, continuous one touch tilt, allowing for easy adjustment to achieve the perfect viewing angle without tools. The mount includes simple to align universal brackets and a unique wall plate that can be mounted to a single wood stud or concrete. For easy installation the mount is preassembled and includes a Sorted-For-You fastener pack with all screen hardware and security fasteners. PRODUCT FEATURES: Integrated security features provide effective theft deterrence; Adjustable 15? of forward tilt, 5? backward tilt; Self-balancing, one-touch tilt for effortless adjustment; Tilt can be tightened in place if needed; Up to 6" of horizontal adjustment after the screen is mounted; Mounts to single wood stud, concrete, or to single metal stud (with accessory metal stud fasteners); Universal brackets easily hook onto the mount bars for fast installation; Includes hardware for single wood stud, concrete and cinder block; UL tested to four times the stated weight load capacity.
Customer Reviews:
Doesn't work for our 42 in TV.......2007-11-20
Make sure it fits your TV. Our 42IN TV is too wide for this even though the size is according to what it is stated. Then, we have to go through the hassle of returning it.
Nice and simple.......2007-11-07
This mount was easy to install. All the screws were labelled and easy to ID. It is a simple mount, but it does the job well. I would buy it again.
Works great.......2007-09-10
The mount was very easy to install and appears to be well made. The tilt function works fine, but if you have big hands it will probably be a squeeze to get your hands between the TV and the wall to adjust it.
Worth the money.......2007-06-15
This tilting wall-mount was a cinch to install (just find your studs!) and is well-made. Note that it is just long enough to cover two adjacent studs, so they need to be in the right place. I wanted the smallest mount I could find so that it wouldn't be as noticeable behind the TV. On my 37in TV, I only had about a inch of horizontal adjustment once it was on the wall, so measure carefully. On a smaller TV, you'd probably have more adjustment.
The "P" in the model (ST640P) means it has normal (I assume Phillips) screws. The ST640 (no P) has tamper-proof Torx screws, but there is a wrench included in the box to use them. Mine was the ST640, and went up with no problems. You don't want to lose the special wrench, however!
Overall, I'm very happy--Price, Quality, Ship time.
Univ Tlt Wall Mnt for 22-49IN Screen/w/one Touch Tilt.......2007-05-22
I found it easy to install and it works great. And I am not the most mechanical person in the world.
Cheap Consumer Electronics:
- Peerless ST650P Tilting Wall Mount for 32" to 50" Flat Panel Displays (Black)
- Pinnacle Remote Kit for Windows Media Center On Vista
- Pitch Adjustable Wall Mount
- Playstation 3 HDMI Cable
- Plp Flat Panel Display Mount
- Premier Mounts PSPK-5B Universal Speaker Mount for Walls and Ceilings with 2.5-Inch Extensions (Black)
- Pro II Series Ieee 1394 Digital Cable
- PSP 2000 Composite AV Cable
- Rapidrun S-video + Composite Video + Stereo Audio Break-away Flying Lead
- Retractable Firewire Cable 6PIN/6PIN 28AWG 2.6
Cheap Consumer Electronics List
Cheap Consumer Electronics
TV Mounts
|
Mounts
|
Accessories & Supplies
|
Categories
|
Electronics
|
Carts
|
Ceiling Mounts
|
Stands & Pedestals
|
Under Counter Mounts
|
Wall Mounts
Cables To Go - 40315 - 2M (6.5ft) Velocity HDMI Digital Video Cable (Blue)
Samsung LNT4661F 46" 1080p LCD HDTV
Samsung LNT4665F 46" 1080p LCD HDTV
Samsung HPT5064 50" Plasma HDTV
Panasonic TH-42PZ700U 42" 1080p Plasma HDTV
