Product Description
Sanus VisionMount VMF is designed to mount VESA 75/100 LCD televisions up to 50 pounds onto a vertical wall. It allows you to effortlessly tilt your new television up to 15? up or down without the use of tools.
Product Description
The AM2 Universal Swingout Arm fits 17?to 40? flat-panel TV displays and allows 360-degree screen rotation. Features include VESA 75/100/200x100mm compatibility. This revolutionary design features patented Radial Glide Technology which offers smooth tilt adjustment of +/-15 degrees. You can pull your LCD or Plasma panel up to 17? from the wall and push it back to just under 3.5? off the wall when collapsed. All of your cables can be hidden inside the AM2's innovative cable management ports. Plus, it's backed by Premier Mounts' industry-leading Lifetime Guarantee for reliability and quality assurance.
Customer Reviews:
Highly recommended!.......2007-12-15
I read the reviews and I wasn't disappointed. This is a high quality articulated wall mount. No problems installing and mounting my Toshiba Regza (where do they get these names?) 32 inch TV. It was the perfect answer to a perplexing problem. I would recommend this wall mount with out reservation! There were some reviews that worried over the screws - If these won't hold your 32" LCD TV - then the next best thing would be to reinforce the wall with steel posts and weld it on! The screws are just fine!
great mount.......2007-11-18
This mount gave me all the things I needed it to do. tilt,swivel and extend out if needed. Came with all the hardware and a adapter plate for my 200-100 vesa mount. Good solid mount with no problems at a good price.
easy install.......2007-11-13
this unit is very easy to install and very sturdy for smaller TVs. I have this mount for a 19inch flat screen and it does sag slighly when the arm is adjusted for free movement. It isn't noticable though. One of the better priced swingout arm mounts available.
TV Wallmount could be improved.......2007-11-07
This Swingout mount is very sturdy and works quite smoothly. The inserts/grommets that provide protection from edges rubbing on your wires are ridgid and make it difficult to route multiple cables (component and power)through the arms. Semi-hard rubber might have been a better choice. All other features are of excellant quality.
Excellent product.......2007-11-02
Came really quickly and came with everything it said it was going to. Holds up my t.v. just fine. 26'' vizio. Looks great.
Product Description
Premier Mounts, the undisputed leader in mounting solutions for LCD/plasma displays, proudly presents the Universal Series of flat-panel mounts. Model # MS1 fits most LCD/plasma displays from 24"-36" and MS2 fits most displays from 37" to 61". Model MS1 is available in a single-piece wall plate (CTM), while MS2 comes in either a single- (CTM) or -dual (PCM) wall plate design. The uniqueness of the Universal Series design is based on Premier Mounts new Griplate System, which uses an innovative hole plate. The Griplate System accurately supports the appropriate mounting hardware and its 'teeth' set within detents along the mounting bracket for a solid fit while securing the display. This eliminates the need for excessive torque on the mounting hardware that most 'universal' products require. Included set screws at the base of the mounting brackets and safety knobs at the top offer added security after installation and also serve to lock the display in place once lateral placement has been determined. The Universal Series comes in an attractive dark gray finish.
Product Description
Space saving style! Save space and show off your flat panel TV or monitor in style with this wall mount! The wall attachment screws into the mounting surface and the monitor plate slides on and off for removal. The wall mount supports screen sizes up to 32-inches and is VESA 50/75/100 compatible.
Product Description
With this versatile wall mount, there isn't a bad seat in the house. The dual articulating arm, which attaches to any wall, creates the perfect viewing angle for your TV with 180 degree lateral rotation, tilt and swivel. The Articulating LCD Wall Arm supports 23", up to 42" LCD or plasma TV. It folds flat against the wall or extends out up to 15". The two-link arm design provides easy one-touch tilt and up to 180 degrees of swivel for virtually limitless viewing positions. Fits flat panel LCD TVs up to 42". Note: please check what mount your TV requires before place your order. Do not pick the mount by the screen size of your TV. Will This mount Fit my Plasma TV? First check the weight of your TV. It must be less than 165 lbs. Second, look at the back panel of your TV. If your TV has 4 holes or 6 holes on the back of the screen, measure the vertical and horizontal distance between the holes, as shown below. If the vertical distance is within 2.95" - 13", horizontal distance within 19", then this bracket will fit. If you currently have a stand attached to your LCD TV this is usually removed prior to fitting the wall mount. Third, the width of your TV should be 20" or above. Otherwise the mount is too wide to hide behind your TV. We have a larger tilt mount for 32" - 63" TV in our Amazon.com store.
Product Description
Premier Mounts, the undisputed leader in mounting solutions for LCD/plasma displays, proudly presents the Universal Series of flat-panel mounts. Model # MS1 fits most LCD/plasma displays from 24"-36" and MS2 fits most displays from 37" to 61". Model MS1 is available in a single-piece wall plate (CTM), while MS2 comes in either a single- (CTM) or -dual (PCM) wall plate design. The uniqueness of the Universal Series design is based on Premier Mounts new Griplate System, which uses an innovative hole plate. The Griplate System accurately supports the appropriate mounting hardware and its 'teeth' set within detents along the mounting bracket for a solid fit while securing the display. This eliminates the need for excessive torque on the mounting hardware that most 'universal' products require. Included set screws at the base of the mounting brackets and safety knobs at the top offer added security after installation and also serve to lock the display in place once lateral placement has been determined. The Universal Series comes in an attractive dark gray finish.
Customer Reviews:
Sturdy, rugged, easy to attach.......2007-06-10
I ordered a couple of these mounts for a trade show to be used with our Viewsonic N3260w LCD monitors and rented Premier PSD-TS dual post floor stands. The mounts are very sturdy and well constructed and came with a wide variety of mounting screws. The instructions were fairly easy to follow and the entire assembly took less than 30 minutes per monitor. It wasn't even necessary to mark the center of the monitor, as specified in the instructions, to accurately position the mount on the back of the LCD monitor. We didn't use it to mount the monitor on a wall, so I can't comment on that mode of use, but it works very well with a free-standing dual-post floor stand.
Product Description
Premier Mounts, the undisputed leader in mounting solutions for LCD/plasma displays, proudly presents the Universal Series of flat-panel mounts. Model # MS1 fits most LCD/plasma displays from 24"-36" and MS2 fits most displays from 37" to 61". Model MS1 is available in a single-piece wall plate (CTM), while MS2 comes in either a single- (CTM) or -dual (PCM) wall plate design. The uniqueness of the Universal Series design is based on Premier Mounts new Griplate System, which uses an innovative hole plate. The Griplate System accurately supports the appropriate mounting hardware and its 'teeth' set within detents along the mounting bracket for a solid fit while securing the display. This eliminates the need for excessive torque on the mounting hardware that most 'universal' products require. Included set screws at the base of the mounting brackets and safety knobs at the top offer added security after installation and also serve to lock the display in place once lateral placement has been determined. The Universal Series comes in an attractive dark gray finish.
Product Description
Spacedec Display offers a comprehensive product range of multiple Flat Panel Display mounting solutions for diverse applications such as banking, process control, office, medical and retail.PRODUCT FEATURES:Direct Wall Mount provides simple and economical display mounting possibilities;Multiple display products are easily adjusted to suit various display sizes;Ceiling Mount option provides an extensive range of height adjustments;Stylish space saving designs compliments any environments;Display is easy to install;Spacedec Display promotes optimal space utilization.
Product Description
The Atdec 12-22 wall mount suits LCD Flat Panel Displays from 12" (30cm) to 22" (56cm), supports 95% of all Displays. It suits VESA compliant monitors with 75mm x 75mm (3" x 3") and 100mm x 100mm (4" x 4") mounting hole patterns. Supports Flat Panel Displays up to 11kgs (24lbs). This wall mount features a super slim design enabling the rear of the display to be mounted 11mm (?") from the wall. The wall mount incorporates a theft resistant security screw.
Customer Reviews:
Beware this tricky little backwards baby........2007-01-04
I must say that I had to return my Atdec wall mount, cuz it's made in a cut corner way that should be rejected. VESA measurements are 75mm or 100mm, and usually 100mm we would be using. This Atdec wall mount has one piece @ 100mm, but the second part is only 75mm, so it has the smaller 75mm screw-ins. On my 2 LCD PC monitors, the monitors had 100mm screw fittings, so I was forced to put the 75mm piece of the mount afixed to the wall. This made the piece on the wall set in w/ small distance between screws. Ifelt unsure, and after turning my wall mounted monitor on & off a few times. the wall mount 75mm piece started to loosen. Don't buy this mount. Peerless is a far better unit to get for yourself.
Product Description
PRODUCT FEATURES:Wall Mount for Flat Panel Displays (tilting model);Suits LCD and Plasma Flat Panel Displays from 31" (78cm) to 55" (140cm);Suits almost all Displays with both VESA and non-VESA compliant hole patterns;Supports Flat Panel Displays up to 60kg (132lbs);Minimum distance from wall to rear of display = 60mm (2.4");Adjustable tilt from -5 to +10 degrees;Quick and Easy Installation;All hardware included.
Cheap Consumer Electronics:
- Vision Mount Center Channel Mount
- Wii Licensed Component Video Cable
- Wii Remote Controller
- Zoom H2 Handy 2 Track Recorder
- 10M Ultraav HDmi/hdmi Cable
- 25' HDmi Cable
- 2PORT Video Switch 1920X1440 VGA SVGA XGA 15PIN HDb
- 3+1 Internal Port Pci Express Firewire Card
- 32" To 60" Universal Flat Wall Mount
- 3-DEVICE Universal Big-button Remote
Cheap Consumer Electronics List
Cheap Consumer Electronics
TV Mounts
|
Mounts
|
Accessories & Supplies
|
Categories
|
Electronics
|
Carts
|
Ceiling Mounts
|
Stands & Pedestals
|
Under Counter Mounts
|
Wall Mounts
SANUS SYSTEM VM3 VisionMount LCD Wall Mount
Sanus VM2 VisionMount Flat-Panel TV Wallmount with Extension and 2-way Articulation
SANUS SYSTEM VisionMount TV Wall Mounts ( Black )
Dayton HDDV-1M HDMI To DVI Cable 1m
Dayton SHDMI-2M Signature HDMI Cable 2m
