Average customer rating: |
Power Over Enet Poe Injector 1IN/1OUT Csma/cd
Manufacturer: Trendware Usa ProductGroup: CE Binding: Electronics Similar Items: Product Features:
ASIN: B000A4AWEU ![]() |
Product Description
TRENDnet's TPE-101I Power over Ethernet Injector provides an innovative and cost effective solution to a variety of Ethernet devices such as VoIP phones or Wireless Access Points. Reduce costs by using existing CAT5 cable to deliver both power and data where power source is difficult to obtain.
Average customer rating: |
1PORT Poe Injector Ac Input 802.3AF and Cisco Supported
Manufacturer: PowerDsine ProductGroup: CE Binding: Electronics Similar Items: Product Features:
ASIN: B000A0S98A ![]() |
Product Description
PowerDsine's 3001 Power over Ethernet (PoE) 3001 single port Midspan offers a compact and cost effective, fully IEEE 802.3af compliant solution for remote powering of wireless LAN (WLAN) access points, and other low port density installations. The 3001 PoE Midspan eliminates the need for external power supply and its associated AC/DC power cabling, providing a compact, affordable, safe and reliable power solution over existing Ethernet infrastructure.
Average customer rating: |
Poe Injector
Manufacturer: CP TECHNOLOGIES ProductGroup: CE Binding: Electronics Product Features:
ASIN: B000JHH8J0 ![]() |
Product Description
LevelOne s POI-2000 is a passive POE device with internal power to minimize bulky power line and AC outlet management while installing your network. The product is fully compliant with the IEEE 802.3af standard and integrates with the original network to deliver power and data to a remote POE device over nothing more than an existing standard Ethernet cable.
Average customer rating: |
1 Port High Power Poe Injector
Manufacturer: PowerDsine ProductGroup: CE Binding: Electronics Product Features:
ASIN: B000WBJDSW ![]() |
Product Description
The PD-7001G is a solution to the growing demand for PoE, which powers end-terminals above the 15.4W supported by the existing 802.3af standard, as a step towards 802.3at - PoE's high power standardThe PD-7001G allows a safe and cost effective PoE solution for Ethernet end terminals. More devices can be powered via the network, thus eliminating the need to use a power supply and install costly power outlets close to the end device. The 30W unit gives an optimal solution to PTZ and Dome network cameras, 802.11n Access Points, Thin Clients, Video Phones and more
Average customer rating: |
Power Over Ethernet Poe Injector
Manufacturer: SONICWALL ProductGroup: CE Binding: Electronics Product Features:
ASIN: B000LSZ1QO ![]() |
Product Description
The PoE Injector is an IEEE 802.3af compliant power injector that detects the presence of 802.3af compliant devices and "injects" power into the Ethernet cable.
Average customer rating: |
6PORT Poe Midspan Hi Pwr Mngd Ac Input 803.3AF&Cisco Supported
Manufacturer: PowerDsine ProductGroup: CE Binding: Electronics Product Features:
ASIN: B000EGGRFM ![]() |
Product Description
PowerDsine 8006/8012/8001 are Power over Ethernet midspans which enable a unified supply of data, voice, video and power through a single access point by sending power over standard Category 5 and above twisted pair cable.The 8000 High-Power midspan (PoE injector) series eliminates the need for external power supply and its associated AC/DC power cabling, thus providing a highly cost effective, safe and reliable means for powering PTZ network cameras, multi-channel and outdoor wireless LAN access points, and other high power consumption Ethernet devices in enterprise installations.The PowerDsine 8012/8006/8001 High Power over Ethernet midspans sit in tandem to an existing Ethernet or Fast Ethernet switch and connects to standard Category 5 and above infrastructure. This architecture protects customer's investments both in Category 5 and above infrastructure and in Ethernet switch equipment.
Average customer rating: |
Single Port Poe Injector for B/G-3000 & B-420
Manufacturer: ZYXEL ProductGroup: CE Binding: Electronics Product Features:
ASIN: B000FL602G ![]() |
Product Description
ZyXEL PoE-12 is a single-port Power over Ethernet (PoE) Injector that infuses and transmits electricity through unused pairs (4/5 and 7/8) in CAT-5 Ethernet cables, while data flows are carried by the other pairs (1/2 and 3/6). As such both power and data can be delivered to PoE devices (PD) via a single CAT-5 Ethernet cable without extra power supply.With the PoE-12, non-PoE switches can now power IEEE802.3af compliant PoE devices through an effective single CAT-5 Ethernet cable link up to 100m in length.In other words, users can install any IEEE 802.3af compliant PoE devices like WLAN access points or IP surveillance cameras with more freedom. Unlike traditional solutions, the PoE-12 can now take advantage of the effortless connectivity in challenging places, such as ceiling or top of wall, without laying power cables. It means that the devices are now untied from power outlets for maximum flexibility.The PoE-12 is easy to use and needs no configuration. Since only simple inbound and outbound cable plugging is required, installation is straightforward and can be performed by users without power cabling expertise or expense.
Average customer rating: |
Powerware 1PORT POE MIDSPAN HIGH POWER ( PD-8001/AC )
Manufacturer: POWERWARE ProductGroup: CE Binding: Electronics Product Features:
ASIN: B000BOJYAM ![]() |
Product Description
PowerDsine 8012/8006/8001 Midspans eliminate the need for external power supply and its associated AC/DC power cabling, thus providing a highly cost-effective, safe and reliable means for remote powering of terminals with high and non-standard high power consumption, such as Pan Tilt Zoom (PTZ) Network Cameras, Multi Channel Wireless LAN Access Points and RFID Readers.PowerDsien 8012/8006/8001 High Power over Ethernet Midspan family connects to an existing Ethernet infrastructure via standard category 5/5e/6 cabling, and delivers on four pairs, up to 39W power thus enabling the upgrade of the network to PoE while keeping the existing switch. PowerDsine PD-AS-801 Active Splitter may be installed where an end terminal is not standard-compliant.
Average customer rating: |
SMC Networks EZ Connect 2.4 GHz Power Injector (Model SMCAMP-INJ)
Manufacturer: SMC ProductGroup: CE Binding: Electronics Product Features:
ASIN: B00007L3ML ![]() |
Product Description
SMC's 2.4GHz Power Injector is able to power the SMCAMP-250 Amplifier via a Category 5 cable. It allows power to be delivered at a distance of up to 100m (328 feet) and only needs access to standard 12V power, and a Category 5 connection to the network (i.e. Hub or Switch).
Average customer rating: |
24PORT Cost Eff Poe Injector 802.3AF Compliant 19IN Rack Mount
Manufacturer: PowerDsine ProductGroup: CE Binding: Electronics Product Features:
ASIN: B000P22P10 ![]() |
Product Description
PowerDsine 3500 Power over Ethernet (PoE) Midspan family offers a cost effective, fully IEEE 802.3af compliant solution to upgrade existing infrastructure with PoE. PowerDsine 3500 family allows IP telephones, wireless LAN access points, security network cameras and IP terminals to receive power, along with data, over standard Ethernet cables, leaving network infrastructure completely unaltered.With PoE, data and power flow smoothly and safely over a single LAN cable with no interference. A PoE Midspan (PoE injector) resides between the Ethernet switch and the data terminals, delivering data, along with power, from switch to powered devices. It is a highly effective means for injecting power into existing LAN cables.Cheap Consumer Electronics: