Product Description
6M MULTIMODE DUPLEX 62.5/125 FIBER PATCH CABLE LC/SC
Product Description
APC FIBER 62.5/125 DUPLEX MULTIMODE PVC ZIPCORD, LC TO SC, 6 METER
Product Description
APC FIBER 62.5/125 DUPLEX MULTIMODE PVC ZIPCORD LC TO SC 6 METER
Product Description
We offer high-quality�50/125 Low-Smoke Zero-Halogen (LSZH) Fiber Optic Patch Jumpers designed to meet or exceed industry specifications. These Fiber Patch Jumpers are perfect for Fast Ethernet, Fibre Channel, ATM and Gigabit Ethernet applications. Use to connect fiber optic equipment to fiber optic cross-connects, interconnects, and information outlets. Each cable is individually 100% optically inspected and tested for insertion loss and quality. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Custom lengths are available. Features: Low-Smoke Zero-Halogen jackets provide protection from toxic and corrosive gasses in poorly ventilated spaces and other areas where it is most critical. Fully compatible with multimode fiber applications. A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances. Perfect for use in Gigabit Ethernet applications. Lifetime warranty against defects of materials and workmanship. Specifications: Connectors: (2) LC to (2) SC. Buffer OD: 900 �m. Jacket OD: 3.0 mm. Jacket color: Orange. Attenuation @850 nm: 3.75 dB/km. Attenuation @1310 nm: 1.5 dB/km. Min. bandwidth @850 nm: 160 kHz/km. Min. bandwidth @1310 nm: 500 kHz/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.
Product Description
We offer high-quality�62.5/125 Low-Smoke Zero-Halogen (LSZH) Fiber Optic Patch Jumpers designed to meet or exceed industry specifications. These Fiber Patch Jumpers are perfect for Fast Ethernet, Fibre Channel, ATM and Gigabit Ethernet applications. Use to connect fiber optic equipment to fiber optic cross-connects, interconnects, and information outlets. Each cable is individually 100% optically inspected and tested for insertion loss and quality. LSZH jackets are composed of materials that lessen the emmissions of smoke and halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal for use where the protection of people and equipment from harmful corrosive gasses is absolutely critical. Custom lengths are available. Features: Low-Smoke Zero-Halogen jackets provide protection from toxic and corrosive gasses in poorly ventilated spaces and other areas where it is most critical. Fully compatible with multimode fiber applications. A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances. Perfect for use in Gigabit Ethernet applications. Lifetime warranty against defects of materials and workmanship. Specifications: Connectors: (2) LC to (2) SC. Buffer OD: 900 �m. Jacket OD: 3.0 mm. Jacket color: Orange. Attenuation @850 nm: 3.75 dB/km. Attenuation @1310 nm: 1.5 dB/km. Min. bandwidth @850 nm: 160 kHz/km. Min. bandwidth @1310 nm: 500 kHz/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.
Product Description
We offer high-quality Plenum-Rated LC to SC Fiber Optic Patch Jumpers designed to meet or exceed industry specifications. LC Fiber Patch Jumpers are perfect for Fast Ethernet, Fibre Channel, ATM and Gigabit Ethernet. The small LC connectors satisfy the need for higher port density both in the telecom room and the work area, and offer twice the port density of traditional SC and ST fiber connectors. Fiber patch cords are used to connect fiber optic equipment to fiber optic cross-connects, interconnects, and information outlets. The LC cable with latch clip design gives each connection greater durability in resisting pulls, strains and impacts during cabling installs and maintenance. Each cable is individually 100% optically inspected and tested for insertion loss and quality. These cables also provide the fire protection required to run within walls and air plenums without the need for conduit. Custom lengths are available. Connector: LC Male to SC Male. Fiber Size: 62.5/125 micron. Type: Multimode; Duplex. Features: CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. RJ style latch in a connector body half the size of a conventional SC. Small, rugged design. LC connector is easy to engage and disengage featuring a telephone jack style release mechanism. Latch design prevents the plug from snagging when jumper cables are being routed. Immune to electrical interference. Application: Fast Ethernet, Fibre Channel, ATM and Gigabit Ethernet. Subsystem: Telecommunications Closet, Equipment Room, Work Area. Includes LC clips.
Product Description
Get the performance you demand at a price that makes sense with 50/125 multimode fiber patch cords from Cables To Go. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from Cables To Go are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol. Custom lengths are available. Features: Fully compatible with multimode fiber applications. A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances. Perfect for use in Gigabit Ethernet applications. Lifetime warranty against defects of materials and workmanship. Specifications: Connectors: (2) LC to (2) SC. Buffer material: PVC. Buffer OD: 900 �m. Jacket material: PVC (OFNR-rated). Jacket OD: 3.0 mm. Jacket color: Orange. Attenuation @850 nm: 3.75 dB/km. Attenuation @1310 nm: 1.5 dB/km. Min. bandwidth @850 nm: 160 kHz/km. Min. bandwidth @1310 nm: 500 kHz/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.
Product Description
Get blazing-fast 10-Gigabit performance with laser-optimized 50/125 multimode fiber patch cords from Cables To Go. Laser-optimized multimode fiber (LOMMF) cables provide backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10-Gigabit applications. Note: Custom lengths are available. Features: Fully compatible with 50/125 multimode fiber applications. Use with both LED and VCSEL laser light sources. Designed for use in 10-Gigabit ethernet applications. Lifetime warranty against defects of materials and workmanship. Specifications: Connectors: (2) LC to (2) SC. Type: Laser-Optimized 50/125 Multimode Duplex. Optical Multimode 3 (OM3) fiber supporting 2000MHz.km EMB at 850nm. 10 Gigabit transfers up to 300m using 850nm VCSEL source. Jacket material: PVC (OFNR-rated). Jacket color: Aqua.
Product Description
We offer high-quality LC to SC Fiber Optic Patch Jumpers designed to meet or exceed industry specifications. LC Fiber Patch Jumpers are perfect for Fast Ethernet, Fibre Channel, ATM and Gigabit Ethernet. The small LC connectors satisfy the need for higher port density both in the telecom room and the work area, and offer twice the port density of traditional SC and ST fiber connectors. Fiber patch cords are used to connect fiber optic equipment to fiber optic cross-connects, interconnects, and information outlets. The LC cable with latch clip design gives each connection greater durability in resisting pulls, strains and impacts during cabling installs and maintenance. Each cable is individually 100% optically inspected and tested for insertion loss and quality. Custom lengths are available. Connector: LC Male to SC Male. Fiber Size: 62.5/125 micron. Type: Multimode; Duplex. Features: RJ style latch in a connector body half the size of a conventional SC. Small, rugged design. LC connector is easy to engage and disengage featuring a telephone jack style release mechanism. Latch design prevents the plug from snagging when jumper cables are being routed. Immune to electrical interference. Application: Fast Ethernet, Fibre Channel, ATM and Gigabit Ethernet. Subsystem: Telecommunications Closet, Equipment Room, Work Area. Includes LC clips.
Product Description
Get the performance you demand at a price that makes sense with Plenum-Rated 50/125 Multimode Fiber Patch Cords from Cables To Go. They provide higher bandwidth and transmission rates and support longer distances with lower loss than 62.5/125 fiber, but are still cost effective. Perfect for use with today's narrower aperture components, they are fully compatible with multimode applications. 50/125 multimode patch cords from Cables To Go are well-suited for protocols such as Ethernet, Fibre Channel, Infiniband, ATM, and Internet Protocol. These cables provide the fire protection required to run within walls and air plenums without the need for conduit. Custom lengths are available. Features: Fully compatible with multimode fiber applications. A Cost effective solution that provides lower loss and higher bandwidth supporting longer distances. Perfect for use in Gigabit Ethernet applications. CMP rated cable jacket provides the fire protection required to run these cables within walls and air plenums without the need for conduit. Lifetime warranty against defects of materials and workmanship. Specifications: Connectors: (2) LC to (2) SC. Buffer OD: 900 �m. Jacket OD: 3.0 mm. Jacket color: Orange. Attenuation @850 nm: 3.75 dB/km. Attenuation @1310 nm: 1.5 dB/km. Min. bandwidth @850 nm: 160 kHz/km. Min. bandwidth @1310 nm: 500 kHz/km. Maximum tensile load: 100 N/cm. Loaded min. bend radius: 5 cm. Unloaded min. bend radius: 3 cm. Crush resistance: 750 N/cm. Impact resistance: 1000 cycles. Flex resistance: 5000 cycles.
Cheap Consumer Electronics:
- 8-CHANNEL Serial-ata Adapter - 300MB/S Per Channel - 64-BIT Pci-x Interface - So
- 8GB USB2.0 Voyager 31MB/S Read 12MB/S Write Sec Sw Rubber Case
- Acoustic Research Pro II Series Composite Video Cables PR-101
- ACP-EP Memory 1GB 400MHZ DDR2 PC2-3200 1.8V CL3 240PIN Unbuffered DIMM
- ACP-EP Memory 256MB PC2700 200-PIN DDR 333MHz SODIMM (MAC and PC)
- Atomic Clock Radio with Digital and Analog Displays - Gray
- BLACK ALL-IN-ONE Wireless FM Transmitter, Car Charger / DC adapter, and Secure Mounting Holder / Cradle For SANDISK Digital Audio MP3 Player models : SANSA E250 - E260 - E270 - E280 ***Bonus USB Cable included to power Bluetooth and other devices through built-in USB Port
- Black and Decker VP110 VersaPak Gold 3.6-Volt 1.2 Amp Hour NiMH Gold Battery
- Black Toner for Lj 4 4+ 4M 4M 5 5M 5N
- Boss Audio BV3950T In-Dash DVD Player with TV Tuner
Cheap Consumer Electronics List
Cheap Consumer Electronics
Computer Add-Ons
|
Computers & Add-Ons
|
Categories
|
Electronics
|
CPU Processors
|
Computer Cases
|
Computer Speakers
|
Docking Stations
|
Drive Enclosures
|
Drives & Storage
|
Game Hardware
|
Graphics Cards
|
I/O Cards
|
Internet Appliances
|
KVM Switches
|
Memory
|
Mice & Keyboards
|
Modems
|
Monitors & Projectors
|
Motherboards
|
Networking & Online Communication
|
PC Components
|
Presentation Pointers
|
Printers
|
Scanners
|
Sound Cards
|
Video Capture & Editing Devices
|
Webcams
