Product Description
The SmartMount Universal Flat Wall Mount supports virtually any 22" to 49" flat panel screen. The ultra-slim wall plate keeps the screen close to the wall for a very discreet installation that is perfect for boardrooms, digital signage, or home theaters. The mount includes simple to align universal brackets and a unique wall plate that can be mounted to a single wood stud, two wood studs up to 16" apart, or concrete. Includes a Sorted-For You baffle pack with all screen hardware and security fasteners.For a complete compatibility list please refer to the original manufacturer's web site.
Customer Reviews:
Almost great TV mount.......2007-12-26
First, let me start by saying I am blown away by how quickly Amazon filled this order. I placed the order on a Sunday, taking advantage of the standard (free) shipping, and was quite surprised when I received the order the following Wednesday.
The TV mount worked exactly as described, and came with an assortment of screws and other mounting hardware to do the trick. No extra trips to the hardware store - almost. Much to my chagrin, I discovered that when trying to hang my LG flat panel on the wall, this mount didn't extend out enough to allow the AC power cord to plug into the outlet I had located behind the TV. The TV plug projected from the wall about an 1 1/2", requiring me to go to the Depot to purchase a recessed wall outlet, like the ones used for hanging clocks.
My only other comment is that the set screws used to secure the TV to the mount are accessed using a very long allen wrench, and in order to turn them, you must crouch down below the hanging TV and carefully turn the wrench. This isn't terrible, but when the mount is flush against the wall, like this one is designed to fit, you are only able to get 3/4 of a turn of the wrench before you must take it out, and carefully reposition it in the allen screw. The whole process of securing the TV took about 5 minutes.
Have to say, all in all - this mount cost about half what a comparable mount at Best Buy would have cost - and does the trick nicely.
Excellent Wall Mount for the Money.......2007-12-18
I'm using this wall mount with a 37" Olevia LCD TV. It was very easy to install, and the TV is easy to mount and dismount (when needed). Just make sure you screw into wall studs, and not just drywall.
Great stand for the price.......2007-12-11
Seems very well built, and it comes with a ton of extra screws. The only problem is that I can't reach the "safety" screws on the bottom. I am not really concerned because even without those screws it would be just about impossible to knock the TV off the wall. It's working great with our Sharp Aquos 46" LCD.
There is an application guide on Peerless's website if you want to make sure it will fit your TV.
Good value for the money.......2007-11-30
I bought this wall mount for a 32" Vizio. I had to make some modification with the hardware, which wasn't a big deal, and then it went up in about 30 minutes. I took back the Vizio and bought a Toshiba from Amazon, and it went up even more easily. The installation seems very stable.
Delivery was fast and the price was great.
Awsum.......2007-11-30
Very impressed. First time using Amazon. Ordered this on Sunday Night, on my door step Wednesday. Cheaper to wait a few days then go an buy at walk in store. Great wall mount.......
Product Description
The SmartMount for 32" to 63" flat panel screens provides a versatile and secure solution for professional environments such as boardrooms, hotels and stadiums. This mount offers smooth, continuous one touch tilt, allowing for easy adjustment to achieve the perfect viewing angle without tools. The mount includes simple to align universal brackets and a unique wall plate that can be mounted to a single wood stud, two wood studs up to 24" apart, or concrete. For easy installation the mount is preassembled and includes a Sorted-For-You baffle pack with all screen hardware and security fasteners.PRODUCT FEATURES: Fits 32" to 63" flat panel screens; One-touch tilt for effortless positioning and adjustment of the screen; Models available with integrated security features provide effective theft deterrence; Standard models also available; For virtually all 32" to 63" flat panel screens; Adjustable 15? of forward tilt, 5? backward tilt; Self-balancing, one-touch tilt for effortless adjustment; Tilt can be tightened in place if needed; Up to 12" of horizontal adjustment after the screen is mounted; Mounts to one or two wood studs, concrete, cinder block or to two metal studs (with accessory metal stud fasteners); Universal brackets easily hook onto the mount bars for fast installation; Includes additional brackets to accommodate screens with a built-in curve or component box on the back; Includes hardware for wood studs, concrete and cinder block; Comes with Peerless' complete Sorted-For-You baffle pack with all screen hardware included; Screen-specific models are also available.
Customer Reviews:
Sturdy but you may need special screws for your TV.......2007-12-20
The stand is sturdy and comes with quite an assormant of screws for mounting different televisions. I was using it for a Sony W3000 52" TV. It had my TV listed in a book that said which of the sets of screws to use. I tried these and they were too long. It had another set that was the same diameter but they were too short. After reading the manual that came with my telelvision I found out that I needed an inbetween size that did not come with the mount kit. After going to 2 Home Depot's and a Lowes I was unable to find the right size bolts, so I ended up buying a set of washers, and had to use 3 of them for each of the bolts that came with mount kit so that I could tighten them with out poking a hole through the front of the TV. I was actually also surprised with Sony for not including the mounting bolts for their with tv.
Good mount BUT, order the other model for 50"+ sets.......2007-12-20
This mounting system is very strong, well made, and the tilt mechanism works great. The locking screws that secure the TV arm brackets to the mounting plate add an extra level of security.
However, it's a real shame the wall bracket isn't just a couple of inches wider, so it would span 3 studs (on 16" centers). I should have read reviewer G. Knight's comments about this, before ordering.
I should have checked my stud locations before ordering this mount. I discovered that the centerline of my optimal TV location on my wall, was almost directly over a stud. So, I had to shift the mount left to the farthest recommended holes. After mounting the TV on the bracket and shifting it to the right to compensate, the wall bracket flexes by an undesireable amount.
If you are going to mount a 50" or larger TV on your wall, and want a precise placement, I recommend that you avoid this model and go with the ST670 series instead.
On the other hand, if you have a wide latitude for positioning your TV on the wall, or are lucky enough so that your TV's centerline lies directly between two studs (plus or minus 2"), this mount will do the job very nicely. My advice is, determine where you want your TV then check to see if your stud locations are optimally placed, before ordering.
Three stud mount needed for larger, or not centered studs.......2007-12-18
Unit comes with a two stud mount, I am mounting a 60 LG plasma and feel I need Peerless part 200-1901/2. I am finding out that part is about $45 plus shipping. Not available on Amazon and not available retail. Am in the middle of mounting the tv and now I have to wait....something I don't like to do.
Better than the own brand.......2007-12-18
said my installer. I'd add a lot cheaper too. Why on earth should a few pieces of pressed steel cost so much? Better than the Sony (or other brand-name wall mounts) and much cheaper. And by the way, get a local installer, not a chain like Firedog to do the work if you need a wall mount, even one on a chimney. $400 - $600 for a hour's work is simply robbery.
Low profile, strong, option to tilt or lock in place.......2007-12-17
This is a very good choice for a mount if you don't need the ability to swing the TV left or right.
It will handle a great deal of weight, which is not as important with LCDs, but plasmas are very heavy. In my case, I have a Samsung 52" LCD mounted to it, and I feel good knowing I am nowhere near the weight limit.
It is very low profile, which is one of the reasons you bought a flat screen. Why use a mount that holds it farther out from the wall if you don't have to?
It can be locked in five degree increments. So, if you always leave your TV at a certain angle, you can lock it in place and it won't shift over time. I have a much smaller LCD in the kitchen on a fully articulating mount, and I wish I could lock that one as it tends to sag forward over time and has to be readjusted. Very annoying.
There are large screws that have to be drilled into studs to install this. If you have a strong hammer drill, this is a good chance to use it. It cannot be installed without a good drill as the giant screws screw directly into the wall studs to keep all the weight securely mounted. Use a good edge-finding stud scanner to find the center of the studs so that you know the screws are secure.
After the mount is securely affixed to the wall, and the bracket is screwed into the back of the TV, it is a fairly simple matter to just hang the TV on the wall. Just make sure you use two people for the last step so that you can maneuver the television in place without dropping it.
Product Description
The Universal Projector Flush Mount suits 90% of projectors weighing up to 15kgs (33lbs). It features minimum distance from ceiling 127mm (5"), 360? rotation, and quick release for easy maintenance.
Amazon.com Product Description
The Telehook Universal Projector Flush Mount is exceptionally versatile, and its works well with most projectors weighing up to 33 pounds. It features a 5-inch minimum distance from the ceiling, and can be rotated a full 360 degrees. This white colored mount also features a quick-release mechanism that allows for easy maintenance and installation. This product is protected by a 5-year limited warranty.
Customer Reviews:
Great universal projector mount.......2007-12-18
I was a bit skeptical because the mount was so inexpensive, but for a being a universal mount, it is actually quite nice. It does the job as expected.
Great Mount for Optoma HD70.......2007-12-15
I used the Atdec Telehook Universal Projector Flush Mount to mount my Optoma HD70. I did have to buy toggle tolts to secure the mount where it needed to be, but I knew that before I bought it. The whole mount took me a couple of hours to mount. Most of that time was due to having to find the exact location it needed to be mounted for my projector to work in the viewing room.
A bargain. And it came with the screws........2007-11-03
First, this mount works fine at less than half the price of most others. It is a bit tricky to adjust, but how often must you do that? It's very adaptable, with many different projector mounting screws that should cover any projector. Despite what previous reviewers have said, it came with two #14 hex head screws and washers for hanging the mount either directly from a joist or (using plastic plugs) simply from wallboard. I would not trust wallboard mounting myself, but it would probably work with a lightweight projector.
The projector mounting screws come in two bags. The smallest (one length of 2.5 and two lengths of 3.0 metric screws) are in one bag which I failed to notice at first. Since I needed the 2.5Ms for my Optoma projector, I picked up some at the local hardware store -- only to later find the supplied ones in the separate bag. All the other projector mounting screws are in a large plastic bag with separate compartments for each size. Unfortunately the compartments are labeled with letters, and the instruction leaflet only refers to them by size. Once I discovered the three smallest screw sizes in their separate bag, I then noticed that the other screws were listed in the parts inventory in the same order as the letters on the compartments. Knowing that, you can easily figure out which screws are which, but it would have been much better to show the letters with the sizes in the instruction leaflet.
Overall, I am quite pleased with this mount. And being a universal mount should make it simple when I upgrade to an HD projector.
Solid but not quite solid enough.......2007-10-08
I purchased this item for my Sanyo PLV-Z5. I previously (in my former house) had a Chief mount. Chief mounts cost twice as much as this one. When I opened the package for this, I was pleasantly surprised; very dense, high quality metal, nice solid customization, easy to use screws, etc. But once I actually got it up on the ceiling, I was disappointed to discover it does not have a full range of tilt settings, but more critically, it is very difficult to have perfectly steady and secure. It took me an hour to get it even with the screen and I'm still (months later) tinkering with it to get the screws as tight as I can. It's hard to describe what I'm talking about without having one, but basically, the screws that you tighten to make sure the projector doesn't shake at all are not tough/large/secure enough to keep it from shaking. I'm not talking the San Andreas fault here. It's probably not perceptible to someone not familiar with home theater stuff. But I notice.
On the whole though, for half the price of chief you get something ALMOST (not quite) as good. Pretty good deal and product.
A bit pricey, but did the job.......2007-09-22
This is a solid mount. Other than not including the screw/bolt you'll need to attach this to the ceiling, it has everything you'll need.
Product Description
The SmartMount Universal Tilt Wall Mount supports virtually any 13" to 42" flat panel screen. The tilting wall plate keeps the screen close to the wall for a very discreet installation that is perfect for digital signage, POS stations, or office applications. Featuring one-touch tilt, the SmartMount allows the screen to be tilted +15/-5 degrees without the use of tools. For a quick and easy installation it may be mounted to a single wood stud or concrete.PRODUCT FEATURES: One-touch tilt for effortless positioning and adjustment of the screen; Integrated security features provide effective theft deterrence; Universal mount fits virtually any 13" to 42" flat panel screen; Screen adapter plates included compatible with VESA 75mm, 100mm, 200mm and 200mm x 200mm mounting hole patterns; One-touch tilt allows tilt adjustment of +15/-5 degrees without the use of tools; Desired tilt angle can be locked in place if needed; Screen adapter plate simply hooks onto the wall plate for quick and easy installation; Security screws lock down the screen for effective theft deterrence; Includes hardware for installation to single wood stud, concrete, and cinder block; UL tested to four times the stated weight load capacity.
Customer Reviews:
Easy to install, works great!.......2007-11-21
I just mounted a 30" Toshiba LCD to a wood stud using this mount. It took about an hour, but I'm usually slow and methodical. Its rock solid. I would buy this product again.
No problems at all..........2007-11-11
Used to mount a 37" Syntax Olivea. Excellent price considering the WM30 wall mount bracket that the manufacturer sells was $90 plus shipping. Installation was a snap...had it up in less than 20 minutes including locating stud, leveling, drilling and mounting. Screws are very long & thick so make sure you find the exact center of the stud and use a drill with enough power to drive such a long screw. Will be buying 2 more for my other flat panels.
Nice heavy material, Very easy instalation.......2007-11-02
This product made instalation as simple as it should be. Very sturdy construction, you don't have to worry about the TV falling as long as you do your part securing it to the wall. Nice product, good price, Highly recomend.
WOW.......2007-08-24
You could do pull-ups on the mount. It is strong, solidly built, and it comes with ALL of the hardware. These guys have done a terrific job of ensuring that this mount is truly universal. Well done!
Outstanding for the money........2007-07-22
I needed a VESA 100x200 mount for my Samsung LN-T2342H 23" LCD HTDV. This was the cheapest I could find for that VESA standard. Do not let the price fool you. The build quality is very nice on this unit. Way better than those "star" brackets. Installation was no problem. Hardest part was finding all my lines. The mounting hardware is top notch. They give you heavy duty wood screws to go into the studs and anchors if no studs. Over 2" screw I think. I had a an issue, based on where I wanted my TV, that only allowed me to use the upper-right most mounting hole for the stud. I proceeded to use the 3 anchors and the supplied screws to mount 2 in the center and one one the left. I then found a replacement wood screw for the stud. Size size. Screwed that in and that baby ain't movin' The tilt function is very nice however the saftey screws are a pain to tighten. No biggie though. Just location sucks. I do wish the wall bracket was a tad wider to allow more left/right movement. The saftey screw issue with a "want" for a wider bracket resulted in a 4 star. Really is 4.5.
Product Description
This SmartMount for virtually all 22" to 49" flat panel screens provides a versatile and secure solution for professional environments such as boardrooms, hotels and stadiums. This mount offers smooth, continuous one touch tilt, allowing for easy adjustment to achieve the perfect viewing angle without tools. The mount includes simple to align universal brackets and a unique wall plate that can be mounted to a single wood stud or concrete. For easy installation the mount is preassembled and includes a Sorted-For-You fastener pack with all screen hardware and security fasteners. PRODUCT FEATURES: Integrated security features provide effective theft deterrence; Adjustable 15? of forward tilt, 5? backward tilt; Self-balancing, one-touch tilt for effortless adjustment; Tilt can be tightened in place if needed; Up to 6" of horizontal adjustment after the screen is mounted; Mounts to single wood stud, concrete, or to single metal stud (with accessory metal stud fasteners); Universal brackets easily hook onto the mount bars for fast installation; Includes hardware for single wood stud, concrete and cinder block; UL tested to four times the stated weight load capacity.
Customer Reviews:
Solid mount, good for the price.......2006-10-28
First, I'm sorry that I forgot that there wasn't a picture of this mount, or else I would have taken one before I mounted the screen. The mount is a flat piece of steel, with grooves on the top and the bottom and multiple holes for mounting. There are two pieces which screw into the back of your flat panel (with included hardware, see below for details), and hook to the mounting plate and provide the ability to tilt.
Mounting was not the easiest in the world; if you aren't handy at all with tools, you should get help or think about another mount. You will need:
1) A stud finder
2) A level
3) Drill with 3/8" bit
4) Wrench to drive in the lag bolts, or better yet an adapter for the drill.
5) Screwdriver to take the TV off its current stand.
I have a 37" LCD screen (by Olevia) I was mounting, so I decided to use two studs. Maybe with a smaller screen you could get away with just one, but given that you are putting something worth a grand or more on the wall, having it come crashing down is a bad thing. Putting up the mount is slightly difficult; if you have ever put up anything heavy that needs to be level you will be OK.
Once I got the mount up (the hardest part was getting the TV onto the mount) I am very happy with it. It has a very solid feel, that flat panel isn't going anywhere. They advertise a "one touch" tilt: I disagree. If you want to constantly adjust the angle, get another product. This works best in the "set it and leave it alone" mode. I have this on the wall in the bedroom, up high enough so the sight line clears the end of the bed. This is perfect, because the mount tilts downward, so while in bed you have a 0 degree angle of view.
I did mention the mounting hardware. The brackets that attach to the TV mount differently to each model. There is a long list, sorted my manufacturer, which tells you which of the included hardware (different lengths of screws, washers, and spacers) you may need. Be sure to read that. It is critical. Get the wrong hardware and your set will come right off the mount.
Overall, I'm very pleased. This mount does what I needed it to do, and went up with only a minor fight.
No problems.......2006-07-11
The product came very quickly with no problems. I would buy from them again.
Product Description
The SmartMount for 30" to 50" flat panel screens provides a versatile and secure solution for professional environments such as boardrooms, hotels and stadiums. This mount offers smooth, continuous one touch tilt, allowing for easy adjustment to achieve the perfect viewing angle without tools. The mount includes simple to align universal brackets and a unique wall plate that can be mounted to a single wood stud, two wood studs up to 24" apart, or concrete. For easy installation the mount is preassembled and includes a Sorted-For-You baffle pack with all screen hardware and security fasteners.PRODUCT FEATURES: One-touch tilt for effortless positioning and adjustment of the screen; Models available with integrated security features provide effective theft deterrence; Standard models also available; For virtually all 30" to 50" flat panel screens; Adjustable 15? of forward tilt, 5? backward tilt; Self-balancing, one-touch tilt for effortless adjustment; Tilt can be locked in place if needed; Up to 12" of horizontal adjustment after the screen is mounted; Mounts to one or two wood studs, concrete, cinder block or to two metal studs (with accessory metal stud fasteners); Universal brackets easily hook onto the mount bars for fast installation; Includes additional brackets to accommodate screens with a built-in curve or component box on the back; Includes hardware for wood studs, concrete and cinder block; Comes with Peerless' complete Sorted-For-You baffle pack with all screen hardware included;Screen-specific models are also available.
Customer Reviews:
Great product, great price .......2007-10-01
This mount was ALOT less expensive than many mounts found in department or electronic name brand stores. It arrived quicker than we expected and it was easy to install and has been holding up excellently for over 6 weeks now. I highly recommend this mount. We used it to mount a 42" Sharp Aquos HDTV, and it was great. You cannot go wrong, especially with the mere $95 price tag.
tlt wall mount.......2007-08-31
The mount needed adjusting to mount properly on the wall. There was too much play on one side which caused it to hang lower on that side. The installer made adjustments to make it work.
Just minor problems with this.......2007-08-31
This mount works as advertised. The only problem I had was that the mounting holes did not allow me to bolt the unit directly into 16" spaced studs so I had to use a drywall anchor. While the holes would allow such placement, the unit itself would have been offset from the center of the wall to accomplish this. A minor complaint, surely but enough to warrant one less star.
Easy to install on brick wall.......2007-06-23
The most important thing I can say is it was easy to install. We were able to install it on our brick wall, I had truoble finding a wall mount that could do that so we were happy when we found this one. I have to add that we have a 50" magnavox and there were not instructions on how to install this particular TV size and brand, but it was so easy we were able to improvise and use it on our set anyways. Also another good thing about this is that it installs onto the wall plate in seconds, that was very helpful as the TV weighs 120 lbs and it was just my husband and I lifting it onto the plate that goes on the wall.
simple.......2007-02-13
everthing you need to hang your tv on the wall is included. great buy
Product Description
The SmartMount Universal Tilt Wall Mount supports virtually any 10" to 30" flat panel. The tilting wall plate keeps the screen close to the wall for a very discreet installation that is perfect for digital signage, POS stations, or office applications. Featuring one-touch tilt, the Smartmount allows the screen to be tilted +15/-5 degrees without the use of tools. For a quick and easy installation it may be mounted to a single wood stud or concrete. PRODUCT FEATURES: Integrated security features provide effective theft deterrence; One-touch tilt for effortless positioning and adjustment of the screen; Universal mount fits virtually any 10" to 30" flat panel screen; Screen adapter plate compatible with VESA 75mm and 100mm; One-touch tilt allows tilt adjustment of +15/-5 degrees without the use of tools; Desired tilt angle can be locked in place if needed; Screen adapter plate simply hooks onto the wall plate for quick and easy installation; Includes hardware for installation to single wood stud, concrete, and cinder block; UL tested to four times the stated weight load capacity.
Product Description
This universal ceiling mount has a discreet, low-profile design allowing fast and easy installation for your projector. Includes quick-release for easy projector removal and maintenance; only four adjustment points to align independently for roll, pitch and yaw; Armor Lock secured connection points and easy cord management via the access opening. Ships standard with a flush mount and includes hardware for installation to wood joist or concrete. Pitch: +5?/ -20?, Roll: ? 10?, Yaw: 360? when used with extension arm (30? swivel when flush mounted); made of aluminum alloy with a black finish.This product is designed for the following systems:InFocus: LP 240, LP250, LP340, LP340B, LP350, LP500, LP530, LP540, LP600, LP640, LP650, LP690, LP790, LP790HB, LP815, LP820, SP110, SP-4800, SP-4805, SP5000, SP-5700, SP-7200, SP-7205, SP-7210, X1, X1A, X2, X3;Proxima: DP2000s, DP2000x, DP6150, DP6155, DP6500x, DP8000, DP8000HB, DP8200;ASKProxima: C40, C50, C100, C105, C109, C110, C160, C170, C180, C200, C300, C300HB, C410, C420.For a complete compatibility list please refer to the original manufacturer's web site.
Customer Reviews:
good product.......2007-09-06
relatively simple to install, with fairly clear instructions - the only issue really is that if you want to install it on anything except the direct mount (for example, suspended ceiling, or at an offset from the ceiling) you have to buy extra components which aren't necessarily easy to track down. Once up it is solid and stable.
Product Description
This unique universal projector mount fits standard 1 1/2" pipe drop.
Customer Reviews:
it works fine.......2007-03-08
It's a mount. It works. It's sturdy. I think it was pricey but I needed it for the projection unit.
Serviceable.......2007-01-10
The Mount is OK, but for 100 bucks I would expect it to be more adjustable than just the three screws. It has good height adjustment and thats about it.
Good one.......2006-03-09
This really works & is very sturdy. The problem is the bolts they give is too heavy for light home projectors. Just get 14inch screws from Lowes & you will be OK.
The manual is not good.
A superb Ceiling Mount.......2005-09-17
This ceiling mount is truly universal. It was very easy to install -- I was able to do it in about 30 minutes. It has a very unique system of plates to hold virtually any projector. The tube extending from the ceiling downwards is adjustable, I found it very easy to adjust the height of the projector. The "micro" manipulations of the mount to adjust the final image on your screen could be a bit easier to use and a bit more flexible, but it was quite adequate overall.
This is an excellent mount at a very good price.
Product Description
True audiophiles and home theater enthusiasts know that Audio/Video furniture and loudspeaker supports must not only be beautiful, in reality they must enhance the performance of the Audio/Video system. No company has paid more attention to the all-important technological details than Sanus Systems.PRODUCT FEATURES:Professional grade construction;Independent adjustments make aiming easy;Sleek design with decorative covers.
Cheap Consumer Electronics:
- USB Behind-the-neck Headset
- ValueRAM 1GB 266MHZ DDR PC2100-DIMM CL2.5 NO RETURNS ( KVR266X64C25/1G )
- Verbatim CD-R 80MIN 700MB 52X LightScribe (30pk Spindle Box)
- XP3 ULTRA PROGRAMMABLE FLOATING MESSAGE CLOCK BLUE
- Yamaha DD55CAD Touch-Sensitive Digital Drums with AC Adapter
- Zune 80 GB Digital Media Player Black (2nd Generation)
- 110 watts X 7 Receiver
- 15ft SVGA Hi-res Video Extension Cable Db15m/dd15f
- 3M Duplex Fiber Multimode Lc/st 50/125 Patch Cable
- 7M ( 23FT ) Atlona VGA to RGBHV (BNC) / RGBHV (BNC) to VGA Breakout Video Cable
Cheap Consumer Electronics List
Cheap Consumer Electronics
Accessories & Supplies
|
Refurbished & Used
|
Special Features
|
Electronics Features
|
Electronics
Peerless SF660 Flat Wall Mount for 32-63IN Flat Panel Screens
Toshiba REGZA 32LV67U 32" LCD HDTV with Built-In DVD Player
Toshiba REGZA 32HL67U 32" 720p LCD HDTV
Samsung LNT3242H 32" LCD HDTV
Samsung LNT2642H 26" LCD HDTV
Cables To Go - 27082 - 6ft Velocity Component Video Cable (Blue)
Logitech Harmony 880 Advanced Universal Remote Control
