Product Description
The SmartMount Universal Flat Wall Mount supports virtually any 22" to 49" flat panel screen. The ultra-slim wall plate keeps the screen close to the wall for a very discreet installation that is perfect for boardrooms, digital signage, or home theaters. The mount includes simple to align universal brackets and a unique wall plate that can be mounted to a single wood stud, two wood studs up to 16" apart, or concrete. Includes a Sorted-For You baffle pack with all screen hardware and security fasteners.For a complete compatibility list please refer to the original manufacturer's web site.
Customer Reviews:
TVMAN.......2007-12-30
This mount is great. It does exactly what you need it to do. One tip that I would have would be to swap the hex screws that go in from the bottom to secure the bars to the frame with other screws that are included. This woud be for any mount. There is a special hex wrench that you need to use to attach the origional screws. If you set the TV low on the mount the wrench is too short to tighten the screws.(Mostly my fault for mounting the TV low. The only way you would ever have this problem is if you are trying to mount a center channel speaker directly below the TV. I would buy this mount again in a heartbeat.
Have yet receive the item I ordered.......2007-12-28
I can not give any review as I have not yet receive the item I ordered. I will when I have achance to use it. Thank you.
Almost great TV mount.......2007-12-26
First, let me start by saying I am blown away by how quickly Amazon filled this order. I placed the order on a Sunday, taking advantage of the standard (free) shipping, and was quite surprised when I received the order the following Wednesday.
The TV mount worked exactly as described, and came with an assortment of screws and other mounting hardware to do the trick. No extra trips to the hardware store - almost. Much to my chagrin, I discovered that when trying to hang my LG flat panel on the wall, this mount didn't extend out enough to allow the AC power cord to plug into the outlet I had located behind the TV. The TV plug projected from the wall about an 1 1/2", requiring me to go to the Depot to purchase a recessed wall outlet, like the ones used for hanging clocks.
My only other comment is that the set screws used to secure the TV to the mount are accessed using a very long allen wrench, and in order to turn them, you must crouch down below the hanging TV and carefully turn the wrench. This isn't terrible, but when the mount is flush against the wall, like this one is designed to fit, you are only able to get 3/4 of a turn of the wrench before you must take it out, and carefully reposition it in the allen screw. The whole process of securing the TV took about 5 minutes.
Have to say, all in all - this mount cost about half what a comparable mount at Best Buy would have cost - and does the trick nicely.
Excellent Wall Mount for the Money.......2007-12-18
I'm using this wall mount with a 37" Olevia LCD TV. It was very easy to install, and the TV is easy to mount and dismount (when needed). Just make sure you screw into wall studs, and not just drywall.
Great stand for the price.......2007-12-11
Seems very well built, and it comes with a ton of extra screws. The only problem is that I can't reach the "safety" screws on the bottom. I am not really concerned because even without those screws it would be just about impossible to knock the TV off the wall. It's working great with our Sharp Aquos 46" LCD.
There is an application guide on Peerless's website if you want to make sure it will fit your TV.
Product Description
The SmartMount for 32" to 63" flat panel screens provides a versatile and secure solution for professional environments such as boardrooms, hotels and stadiums. This mount offers smooth, continuous one touch tilt, allowing for easy adjustment to achieve the perfect viewing angle without tools. The mount includes simple to align universal brackets and a unique wall plate that can be mounted to a single wood stud, two wood studs up to 24" apart, or concrete. For easy installation the mount is preassembled and includes a Sorted-For-You baffle pack with all screen hardware and security fasteners.PRODUCT FEATURES: Fits 32" to 63" flat panel screens; One-touch tilt for effortless positioning and adjustment of the screen; Models available with integrated security features provide effective theft deterrence; Standard models also available; For virtually all 32" to 63" flat panel screens; Adjustable 15? of forward tilt, 5? backward tilt; Self-balancing, one-touch tilt for effortless adjustment; Tilt can be tightened in place if needed; Up to 12" of horizontal adjustment after the screen is mounted; Mounts to one or two wood studs, concrete, cinder block or to two metal studs (with accessory metal stud fasteners); Universal brackets easily hook onto the mount bars for fast installation; Includes additional brackets to accommodate screens with a built-in curve or component box on the back; Includes hardware for wood studs, concrete and cinder block; Comes with Peerless' complete Sorted-For-You baffle pack with all screen hardware included; Screen-specific models are also available.
Customer Reviews:
Does the job well.......2007-12-30
This is a well designed mount that does the job. It was easy to install and came with all the hardware needed. There is a sheet that lists all the TVs this mount will work with. Simply find your brand and model and the sheet directs you to the labeled packets of hardware needed for your TV. You may have to visit the Peerless website if your TV is too new to have made the list when the mount was produced. If you have any doubts about which mount you need, the Peerless website will direct you to the correct mounts for your TV.
The one-touch tilt is a bit misleading. You have to loosen a wing nut on each side to adjust the tilt, but it isn't difficult if you have some help. Overall, I would recommend this mount and the price is very reasonable for what you get.
Peerless ST660 Wall Mount Just So-so for Panasonic TH-58PZ700U Plasma.......2007-12-28
Per the Peerless website, this wall mount is compatible with the 58" Panasonic. However, I would only recommend using this mount for such a large/heavy (approx 145 lb) TV based on the location & quantity of wall studs you are able to mount to. If you happen to have the Panny 58" 700U, I strongly recommend you check to see if you have at least 2 wall studs that will be centered (or close to center) behind the TV. I could only mount to 2 studs and they were off center by close to 4". The directions allow the mount to be up to 4" off center, so I decided to keep the mount. However, once I mounted the TV, the wall mount (on the "weak side") pulled away from the wall slightly. I'm confident it will hold the TV but, if I had to do it again, I'd purchase a mount that uses slightly heavier gauge material (I believe Peerless does have a stronger mount available). If you are fortunate enough to be able to mount this wall mount to 2 studs centered behind the TV or, even better, 3 studs or have a smaller/lighter TV, I would not have any problem recommending this unit. One last thing - the installation directions could be better. One statement says always use multiwashers and another entry for my particular TV says the washer isn't needed. Another statement says the braces must be centered on the back of the TV and another says the braces don't need to be centered on my TV. Not a big deal but these obvious conflicting statements should not exist in installation directions.
Peerless Universal Tilt Wall Mount worked great.......2007-12-28
I used this product to hang a 50" plasama to the wall. The instructions were very clear and the product works great. I would recommend this to anyone.
Sturdy but you may need special screws for your TV.......2007-12-20
The stand is sturdy and comes with quite an assormant of screws for mounting different televisions. I was using it for a Sony W3000 52" TV. It had my TV listed in a book that said which of the sets of screws to use. I tried these and they were too long. It had another set that was the same diameter but they were too short. After reading the manual that came with my telelvision I found out that I needed an inbetween size that did not come with the mount kit. After going to 2 Home Depot's and a Lowes I was unable to find the right size bolts, so I ended up buying a set of washers, and had to use 3 of them for each of the bolts that came with mount kit so that I could tighten them with out poking a hole through the front of the TV. I was actually also surprised with Sony for not including the mounting bolts for their with tv.
Good mount BUT, order the other model for 50"+ sets.......2007-12-20
This mounting system is very strong, well made, and the tilt mechanism works great. The locking screws that secure the TV arm brackets to the mounting plate add an extra level of security.
However, it's a real shame the wall bracket isn't just a couple of inches wider, so it would span 3 studs (on 16" centers). I should have read reviewer G. Knight's comments about this, before ordering.
I should have checked my stud locations before ordering this mount. I discovered that the centerline of my optimal TV location on my wall, was almost directly over a stud. So, I had to shift the mount left to the farthest recommended holes. After mounting the TV on the bracket and shifting it to the right to compensate, the wall bracket flexes by an undesireable amount.
If you are going to mount a 50" or larger TV on your wall, and want a precise placement, I recommend that you avoid this model and go with the ST670 series instead.
On the other hand, if you have a wide latitude for positioning your TV on the wall, or are lucky enough so that your TV's centerline lies directly between two studs (plus or minus 2"), this mount will do the job very nicely. My advice is, determine where you want your TV then check to see if your stud locations are optimally placed, before ordering.
Product Description
The SmartMount Universal Flat Wall Mount supports virtually any 32" to 63" flat panel screen. The ultra-slim wall plate keeps the screen close to the wall for a very discreet installation that is perfect for boardrooms, digital signage, or home theaters. The mount includes simple to align universal brackets and a unique wall plate that can be mounted to two wood studs up to 24" apart, or concrete. Includes a Sorted-For-You baffle pack with all screen hardware and security fasteners.For a complete compatibility list please refer to the original manufacturer's web site.
Customer Reviews:
Great Mount.......2007-12-28
This is a very good product, The mount was very easy to install. It is holding my fairly heavy 46" Aquos with no problem at all.
one out of two.......2007-12-25
only got the mount the company has not sent the TV yet.. said they did not have any more..
peerless SF 660 flat scren wall mount.......2007-12-23
purchased this wall mount for my sony 46" bravia hidef tv paid about 50% less than in the store that i bought my tv from came in just a few days or so free shipping mounted very easy directions were great no problem at all i got the bracket that comes closest to the wall there is also a tilt bracket if you so wish had a little problem before i got it but great customer service dept cleared everything up for me. just make sure this bracket fits your tv once it's up sturdy as can be slides very easy to make sure you get it in the right place you want for the money can't be beat
Works great and easy to install!!!.......2007-12-22
I installed this wall mount and hung my 46" Bravia XBR4 in less than 30min. This is a great item! I is nice that it is completely adjustable when the distance and the location of the beams vary. Great Product!!!
Slim Sturdy and Easy to Install.......2007-12-20
I bought this wall mount for my Samsung 46" LCD. Installation was a breeze. The kit comes with an assortment of screws and a look-up chart so you can cross refernce TV make and model with cortrect screw length. The wall mount was very easy to install. Took approx 20 mins for the wall mount to be secured to the wall studs + 5 mins to attach bars to the TV + 1 min to hang it up. Add another 5 mins to tighten all reamining safety screws.
One word of caution: I strongly suggest you carefully mark the location of the the wall studs. In my case, I wanted to hang the TV in the center of the wall but the stud positioins were not in my favor. As such, I had no choice but to install slightly to the left. The problem is you only have limited room to slide the TV on the maunt/rail to the right before you reach the end of the mount. If your TV allows it, go for the next size up in wall mount. That way, you have more room to sldie the TV left/right to center it in the wall.
Product Description
The Universal Projector Flush Mount suits 90% of projectors weighing up to 15kgs (33lbs). It features minimum distance from ceiling 127mm (5"), 360? rotation, and quick release for easy maintenance.
Amazon.com Product Description
The Telehook Universal Projector Flush Mount is exceptionally versatile, and its works well with most projectors weighing up to 33 pounds. It features a 5-inch minimum distance from the ceiling, and can be rotated a full 360 degrees. This white colored mount also features a quick-release mechanism that allows for easy maintenance and installation. This product is protected by a 5-year limited warranty.
Customer Reviews:
Great universal projector mount.......2007-12-18
I was a bit skeptical because the mount was so inexpensive, but for a being a universal mount, it is actually quite nice. It does the job as expected.
Great Mount for Optoma HD70.......2007-12-15
I used the Atdec Telehook Universal Projector Flush Mount to mount my Optoma HD70. I did have to buy toggle tolts to secure the mount where it needed to be, but I knew that before I bought it. The whole mount took me a couple of hours to mount. Most of that time was due to having to find the exact location it needed to be mounted for my projector to work in the viewing room.
A bargain. And it came with the screws........2007-11-03
First, this mount works fine at less than half the price of most others. It is a bit tricky to adjust, but how often must you do that? It's very adaptable, with many different projector mounting screws that should cover any projector. Despite what previous reviewers have said, it came with two #14 hex head screws and washers for hanging the mount either directly from a joist or (using plastic plugs) simply from wallboard. I would not trust wallboard mounting myself, but it would probably work with a lightweight projector.
The projector mounting screws come in two bags. The smallest (one length of 2.5 and two lengths of 3.0 metric screws) are in one bag which I failed to notice at first. Since I needed the 2.5Ms for my Optoma projector, I picked up some at the local hardware store -- only to later find the supplied ones in the separate bag. All the other projector mounting screws are in a large plastic bag with separate compartments for each size. Unfortunately the compartments are labeled with letters, and the instruction leaflet only refers to them by size. Once I discovered the three smallest screw sizes in their separate bag, I then noticed that the other screws were listed in the parts inventory in the same order as the letters on the compartments. Knowing that, you can easily figure out which screws are which, but it would have been much better to show the letters with the sizes in the instruction leaflet.
Overall, I am quite pleased with this mount. And being a universal mount should make it simple when I upgrade to an HD projector.
Solid but not quite solid enough.......2007-10-08
I purchased this item for my Sanyo PLV-Z5. I previously (in my former house) had a Chief mount. Chief mounts cost twice as much as this one. When I opened the package for this, I was pleasantly surprised; very dense, high quality metal, nice solid customization, easy to use screws, etc. But once I actually got it up on the ceiling, I was disappointed to discover it does not have a full range of tilt settings, but more critically, it is very difficult to have perfectly steady and secure. It took me an hour to get it even with the screen and I'm still (months later) tinkering with it to get the screws as tight as I can. It's hard to describe what I'm talking about without having one, but basically, the screws that you tighten to make sure the projector doesn't shake at all are not tough/large/secure enough to keep it from shaking. I'm not talking the San Andreas fault here. It's probably not perceptible to someone not familiar with home theater stuff. But I notice.
On the whole though, for half the price of chief you get something ALMOST (not quite) as good. Pretty good deal and product.
A bit pricey, but did the job.......2007-09-22
This is a solid mount. Other than not including the screw/bolt you'll need to attach this to the ceiling, it has everything you'll need.
Product Description
The SmartMount Universal Tilt Wall Mount supports virtually any 13" to 42" flat panel screen. The tilting wall plate keeps the screen close to the wall for a very discreet installation that is perfect for digital signage, POS stations, or office applications. Featuring one-touch tilt, the SmartMount allows the screen to be tilted +15/-5 degrees without the use of tools. For a quick and easy installation it may be mounted to a single wood stud or concrete.PRODUCT FEATURES: One-touch tilt for effortless positioning and adjustment of the screen; Integrated security features provide effective theft deterrence; Universal mount fits virtually any 13" to 42" flat panel screen; Screen adapter plates included compatible with VESA 75mm, 100mm, 200mm and 200mm x 200mm mounting hole patterns; One-touch tilt allows tilt adjustment of +15/-5 degrees without the use of tools; Desired tilt angle can be locked in place if needed; Screen adapter plate simply hooks onto the wall plate for quick and easy installation; Security screws lock down the screen for effective theft deterrence; Includes hardware for installation to single wood stud, concrete, and cinder block; UL tested to four times the stated weight load capacity.
Customer Reviews:
Easy to install, works great!.......2007-11-21
I just mounted a 30" Toshiba LCD to a wood stud using this mount. It took about an hour, but I'm usually slow and methodical. Its rock solid. I would buy this product again.
No problems at all..........2007-11-11
Used to mount a 37" Syntax Olivea. Excellent price considering the WM30 wall mount bracket that the manufacturer sells was $90 plus shipping. Installation was a snap...had it up in less than 20 minutes including locating stud, leveling, drilling and mounting. Screws are very long & thick so make sure you find the exact center of the stud and use a drill with enough power to drive such a long screw. Will be buying 2 more for my other flat panels.
Nice heavy material, Very easy instalation.......2007-11-02
This product made instalation as simple as it should be. Very sturdy construction, you don't have to worry about the TV falling as long as you do your part securing it to the wall. Nice product, good price, Highly recomend.
WOW.......2007-08-24
You could do pull-ups on the mount. It is strong, solidly built, and it comes with ALL of the hardware. These guys have done a terrific job of ensuring that this mount is truly universal. Well done!
Outstanding for the money........2007-07-22
I needed a VESA 100x200 mount for my Samsung LN-T2342H 23" LCD HTDV. This was the cheapest I could find for that VESA standard. Do not let the price fool you. The build quality is very nice on this unit. Way better than those "star" brackets. Installation was no problem. Hardest part was finding all my lines. The mounting hardware is top notch. They give you heavy duty wood screws to go into the studs and anchors if no studs. Over 2" screw I think. I had a an issue, based on where I wanted my TV, that only allowed me to use the upper-right most mounting hole for the stud. I proceeded to use the 3 anchors and the supplied screws to mount 2 in the center and one one the left. I then found a replacement wood screw for the stud. Size size. Screwed that in and that baby ain't movin' The tilt function is very nice however the saftey screws are a pain to tighten. No biggie though. Just location sucks. I do wish the wall bracket was a tad wider to allow more left/right movement. The saftey screw issue with a "want" for a wider bracket resulted in a 4 star. Really is 4.5.
Product Description
Change the way you view the world! Sleek and streamlined, the LX frees up space and allows positioning of your display for greater productivity. Reposition your LCD with just a touch. Up. Down. Forward. Back. The LX provides unparalleled range of motion.PRODUCT FEATURES:Upgrade LCD monitors and TVs with improved ergonomic adjustment;Patented CF motion technology provides premium ease-of-use display adjustment;Cable management feature routes cables under the arm, out of the way;Extends/retracts LCD up to 24"; push your display out of the way when not in use;13" height range meets the ergonomic needs of more than nine out of ten adults;Compact design frees up space.
Customer Reviews:
Very Good Monitor Arm.......2007-12-25
I'm using this Ergotron LX Desk Mount Arm to hold up my Sony SDM-X82 18.1" LCD monitor. It works very well. I don't have any problems with it, but here are a few things to keep in mind:
- Make no assumptions about where you will mount this arm. For both this and my nearly identical notebook arm, I glanced at the desks where they'd be used, saw they had edges, and assumed all was well. Well, I was wrong. There were supporting panels below the desk that interfered with proper mounting. With some finagling, I managed to get both arms mounted. But, I highly recommend you crawl under your desk and make some measurements before buying this. If you intend to clamp it to an edge, it looks like you'll need (optimally) about 3-1/2" of lip (the desktop should be between 1/2" and 1-7/8" thick). If you intend to mount it through a hole on the desk, make sure you have access to the underside of the desk where that hole is (or will be -- I ended up drilling a 1/2" hole through my desktop for this option).
- You WILL have to adjust the various tensioning screws. If you don't, the thing will probably droop down to your desktop at the first opportunity.
- Before buying, go to Ergotron's site, look up the product, and then go to Support Center | Display Compatibility. There, you'll be able to see if the arm can support your monitor. Most LCDs less than 24" are probably good out of the box. But, bigger LCDs will probably require an additional 200x200 VESA mount (or maybe even a higher capacity arm).
I'm very happy with this arm. Outside of what I noted (and those are my problems and not problems with the product), it works well and looks good. I rate it a Very Good 4 stars out of 5.
Great product.......2007-12-17
I'm using a 22" LCD monitor(CHIMEI) and the mount has no problem holding my monitor. I change the position of my monitor quiet often and the joint of the mount has no sign of getting loose. I recommend it!
Ergotron .......2007-12-11
Great product, however the packing of the product needs some help. Out of three the three products I got two had cracks in it from the way it was packed, it needs a better packing method between the base of the main shaft where the foot is and the main control arm. Amazon has great customer service. I have not yet had a problem working with Amazon and have done business with them on several occasions. Thanks for the superior customer service.
kinjimoto
splendid ergotron.......2007-11-21
i could say that i am more than satisfied with this product. it's material and quality are excellent. there is nothing less than it is described on the ergotron site. in fact the package contains "more" than i have expected. it contains all the accesories and tools that ate needed to mount yor monitor on the arm.(2 sizes of vesa mount and 2 types of desk mount[on the side of the desk or through a hole]). some may say that it is expensive but i dont believe that i could find something cheaper but that good.
top quality.top buy
No mounting bracket included for 24" monitor.......2007-11-03
I'd give the arm itself a 5 star rating. Not disappointed in it at all.
I just want to warn people that if they have a large monitor that they may need an adapter plate (bracket) that is NOT included with the arm.
I have a Samsung SyncMaster 245bw that needs the wide bracket. The Ergotron company's suggested retail price is $50. Amazon charges $43 (if this is even the correct part) "Wall Mount Bracket Kit" found at the link "Other products by Ergotron"
...or if you have a few tools, you can do what I did and make your own out of a piece of scrap metal for $1.
Product Description
This arm offers a flexible alternative to rigid wall mounts for displays weighing up to 50 lbs (23 kg). Embedded CF technology enables effortless screen adjustment for optimal viewing comfort.PRODUCT FEATURES:Arm extends display out from the wall up to 13" (33 cm) for better sight lines;Rock-solid construction secures your display investment;Effortless adjustment for premium viewing;Easy three-step installation;Pleasing aesthetics make it perfect for the home or office;Integrated tilt lock-down feature.
Customer Reviews:
Great item and price.......2008-01-01
Our biggest focus was finding a mount that would swivel, but wasn't extremely large or cumbersome and after much researching and debate, we finally settled on this mount. Overall, the value was fantastic, and the arm works great for being able to move the TV and making it viewable from almost any angle. As another poster mentioned, the mount can be used without the arm as well, though this does greatly reduce the amount of swivel available. This was also extremely easy to mount (it took all of 5 minutes) and the arm folds back so that it is hidden from view when the tv is not in use.
WOW.......2007-09-22
I did a lot of research on LCD TV mounts before I bought this one. I looked at the ones in the stores like Best Buy. But they were so expensive and I just could not justify them for use with my 32" 39Lb TV. So I decided on this one and I'm glad I did. This one has an extension arm but you can also use it without the arm. I liked that flexibility. Also even without the extension this mount provides side to side swing as well as tilt. Also it provides rotation which makes mounintg it even easier. I spent a lot of time making sure that the 2 mounting holes were perfectly virtical but it is not critical because you can rotate the TV to a perfect level position even if your 2 mounting holes are not perfectly virtical. All of the hardware for mouning was included and I even had hardware left over becasue the 100mm hole pattern on the mounting plate matched the pattern on my TV.
GREAT PRODCT.......2007-03-16
THIS IS A GREAT PRODUCT. WORKS WELL WITH MY 32 LCD TV. EVEYTHING WAS INCLUDED THAT I NEEDED TO PUT IT ON THE WALL WITHIN MINUTES. WORKS GREAT AND LOOKS GOOD TOO!
Product Description
Meet the innovative multi-monitor configuration with the flexibility to work the way you want it to. Make the most of your valuable workspace with the Ergotron LX Desk Mount Arms. This ingenious tool lets you use your notebook screen when docked into a networked system. The LX Dual Desk Mount Arm creates a productive side-by-side dual display configuration when you add an external LCD. Lifting your notebook computer and LCD monitor off the desktop reclaims work surface and positions the screens to relieve eye, neck and back strain.PRODUCT FEATURES:Makes a productive dual-display configuration;Versatile - use with a notebook and LCD, or with two LCDs;Position your notebook and LCD screen for maximum ergonomic comfort to relieve eye, neck and back strain;Free up your desktop to increase your workspace;Easy-to-use - simple installation and effortless operation.
Customer Reviews:
Financial Office Review.......2007-12-08
I have three 22'' monitors which I use. 2 for me on the Ergotron, and 1 other that sits on its stock base for clients to watch on the other side of the desk (it is mirrored one of my two monitors).
That said, the setup is both very aesthetic and incredibly functional. I would recommend these stands to any business professionals who are looking to get more visual desktop space without sacrificing looks.
Great investment.......2007-12-02
I use this mount with a Macbook on one arm and a 20 inch HP monitor on the other arm in my home office. Works wonderfully, you can set the tension on the arms to hold the monitor at the correct height, but yet swing it aside easily if needed. Because of the size of my desk, I only use one section of the arm. It feels very stable and sturdy. It's heavy duty, like something you'd find in a professional office. It is a bit pricey; depending on what you're trying to do you could buy two separate monitor stands for less money.
Simple Elegant.......2007-08-23
I used a MoView arm before... This product is patently better than the other. The arms have amazing range and strength. I am actually holding two 22" monitors with these arms (albeit the monitors are amazingly light). There is plenty of range to have larger monitors still presented side-by-side. The resistance of the arm is adjusted by an Allen wrench and definitely had more weight range than what I am putting on them. I keep my monitors in landscape mode though and haven't really tested their ability to rotate.
I found the product just ingenious for the smallest details. The arms hold your cables so that they can be kept neat. The product came with laptop accessories in the event I wanted to use a one monitor, one laptop configuration, and it had plenty of supplies (screws, velcro, etc)
Product Description
Change the way you view the world. More comfortable, more ergonomic viewing of your LCD Monitor or TV has never been easier. The Ergotron LX Wall Mount Arm with Constant Force lift-and-pivot motion technology reduces eye, back and neck strain.Reposition your LCD Monitor or TV with just a touch. Up. Down. Forward. Back. The LX Wall Mount Arm provides an unparalleled range of motion. You can even rotate from a portrait to a landscape view.PRODUCT FEATURES:Upgrade LCD Monitors or TVs with improved ergonomic adjustment; increase viewing comfort while reducing eye, back and neck strain;Constant Force (CF) Proprietary lift-and-pivot motion technology provides premium ease-of-use display adjustment;Arm extends/retracts LCD up to 24" - push it back out of the way when not in use;Wall mount installation;Compact design frees up space. Cable management feature routes cables under the arm, out of the way;13" (33 cm) vertical range ergonomically meets the seated 5% female to the 95% male eye height; more than nine out of ten adults.
Customer Reviews:
Glad I got it.......2007-12-24
I bought this arm to place a display on a wall near my informal dinner table. I wanted to use this display to show slide shows of my family photos, video streaming from Netflix, and occasional web browsing in the kitchen. I drilled a hole in the wall and connected the display to an old computer on a shelf in the bathroom on the other side. I paid extra for this arm because of the height adjustable feature. I'm glad I did because it makes the display a lot more useful. I could extend and lower it to almost desktop height and use the dining table for my bluetooth keyboard/mouse. Otherwise, I wouldn't be able to browse without sitting on the table
The only way to go for under $200.......2007-11-03
I bought a $30 LCD wall mount on eBay for my HP W2007. It worked, but it was only limited to swivel and tilt movement. After a couple of weeks, the low price started revealing itself. I had to readjust the tension in the tilt every time I adjusted it. Some days I would've like to move the height of the monitor, but I couldn't.
I just had to buy something with more features and better quality.
I was going to buy this Lx Wall Mount Arm originally, but I thought I didn't need all of its features. I was wrong. The height feature is very useful, and I love the landscape and portrait modes.
Installation was very easy. I don't think an instruction manual was necessary. I bought the Wall Mount Bracket Kit because its larger surface area allows the weight to be distributed.
I have my Wall Mount Arm mounted on drywall using 75lb drywall anchors. I needed #8 washers because the screws needed for the drywall anchors are too small for the large mounting holes.
My only gripe with this product is the cable organizers. I personally wouldn't use it because it bends the cables a bit more than I would like them to bend. Additionally, I don't like the cheap plastic that holds them within the arm.
This is a great product and should be your only choice of Wall Mound Arm for your LCD monitor if you plan to spend under $200.
Don't go cheap, you'll regret it!
Excellent articulating arm and a great price!.......2007-02-17
After researching many types and prices, I kept comming back to this one. I'm using it with a Dell 2005FPW 20.1" monitor that weighs 12 lbs. without the stand. It has the VESA mount and it plugged right onto this arm, no problem! I mounted the arm on a mobile cart that allows me to move the monitor to several locations and the arm allows the monitor to be placed in several different positions with no effort! I'm extreamly happy. Delivery was a blink of an eye! It came so fast I wasn't even expecting it, and when it arrived on my doorstep, I wondered what it was!!! Five stars on product and purchase! *****
Great product.......2007-01-31
Ergotron seems to make very high quality products. They aren't the cheapest, but this product seems very well engineered and I highly recommend it to anyone seeking a fully articulating wall mounted monitor solution. I'm using it with a 20" LCD, and it works and looks great.
Product Description
Change the way you view the world. More comfortable, more ergonomic viewing of your LCD Monitor or TV has never been easier. The Ergotron LX Wall Mount Arm with Constant Force lift-and-pivot motion technology reduces eye, back and neck strain.Reposition your LCD Monitor or TV with just a touch. Up. Down. Forward. Back. The LX Wall Mount Arm provides an unparalleled range of motion. You can even rotate from a portrait to a landscape view.PRODUCT FEATURES:Upgrade LCD Monitors or TVs with improved ergonomic adjustment; increase viewing comfort while reducing eye, back and neck strain;Constant Force (CF) Proprietary lift-and-pivot motion technology provides premium ease-of-use display adjustment;Arm extends/retracts LCD up to 24" - push it back out of the way when not in use;Wall mount installation;Compact design frees up space. Cable management feature routes cables under the arm, out of the way;13" (33 cm) vertical range ergonomically meets the seated 5% female to the 95% male eye height; more than nine out of ten adults.
Customer Reviews:
Well Worth the Money!.......2007-12-04
While this product may seem a trifle expensive compared to some other monitor arms that are available, I find it quite worth the money. I first bought this arm for my monitor at work. When I received it, I was quite impressed with the quality and have subsequently bought one for my computer at home. It is very sturdy, easy to assemble and easy to position. I am 100% satisfied with my purchase, the product is great and the delivery was excellent.
need mounting screws.......2007-11-16
this was great for the monitor. but trying to find screws the color of the arm was very difficult. we ended up using just chrome colored screws where black would have been so much better.
Five stars Ergotron!.......2007-09-26
Brillant design, coupled with top quality parts with a very attractive price tag. I'm still trying to figure out how they could do it. Anyway, I'm totally satisfied, it's doing more than I hoped for and it really looks like it's going to last.
Congratulation Ergotron! Some people somewhere really did work hard!
Additional Hardware Required.......2007-03-19
A really great product. However the product details neglect to mention mounting hardware is not included.
The wall attachment is designed to mount on additional Ergotron hardware:
Wall Mount Bracket Kit ($40.00)
or
Wall Track Mounting Kit ($30.00)/Ergotron Wall Track ($40.00)
Best Articulated TV Mounting Arm On Earth.......2007-03-09
This design is well thought-out. Gives great control of angles and positions. I got mine because I live in an RV and need to put my 15" LCD TV out of the way when I'm not watching it. I wanted to extend the TV out and aim it toward the kitchen so I can watch while I'm cooking. This arm allows me to do that. Very high quality and choices of mounting hardware to suit my situation where the walls needed the extra wide track mount to make it secure.
This is a good company that makes a huge variety of products like this.
Cheap Consumer Electronics:
- ViewSonic Optiquest Q7b 17" LCD Monitor
- ViewSonic VA1703wb 17" Wide LCD Computer Monitor
- ViewSonic VA903b 19" LCD Monitor
- ViewSonic VA903b 19" LCD Monitor
- ViewSonic VA903b 19" LCD Monitor
- Viewsonic VP191B ThinEdge 19" LCD Monitor
- Wall Mount Bracket Kit
- Westinghouse W4207 42" High Definition LCD Video Monitor
- Wireless Infrared Headphone System
- 106IN Diagonal Salara/plug&play Motorized Screen HDtv Matt White
Cheap Consumer Electronics List
Cheap Consumer Electronics
Accessories & Supplies
|
Refurbished & Used
|
Special Features
|
Electronics Features
|
Electronics
Peerless SF660 Flat Wall Mount for 32-63IN Flat Panel Screens
Toshiba REGZA 32LV67U 32" LCD HDTV with Built-In DVD Player
Toshiba REGZA 32HL67U 32" 720p LCD HDTV
Samsung LNT3242H 32" LCD HDTV
Samsung LNT2642H 26" LCD HDTV
Cables To Go - 27082 - 6ft Velocity Component Video Cable (Blue)
Logitech Harmony 880 Advanced Universal Remote Control
